Experimental Study on Mechanical Properties of Interface between Basalt Fiber-Reinforced Polymer/Glass Fiber-Reinforced Polymer Composite Cement Plate and Concrete
Lifeng Zhang,Hui Liu,Wenqiang Li,Hangjun Liu,Xuehui An,Xiaoruan Song
DOI: https://doi.org/10.1155/2021/6616898
IF: 2.0981
2021-03-17
Advances in Materials Science and Engineering
Abstract:The bonding behaviors of the plate-concrete interface of a composite structure consisting of a concrete block in the middle and two cement plates at both sides play a key role in its overall mechanical performance. In this paper, the authors conduct 3 groups of push-out shear tests on a total of 39 composite samples to assess the bonding performance. The influence of the FRP cement plates, the concrete strength, and the ribs installed in the cement plate on the interfacial shear strength, the relative bond-slip, strain, and the failure modes of the composite samples is recorded and analyzed. The results show that (1) the shear strength and bond-slip performance of the interface are largely improved if the GFRP/BRRP cement plates are used; (2) shear strength of the interface increases with the concrete strength, while the deformation behaviors show no significant improvement; (3) an inclusion of the ribs to the interface enhances the shear strength and shear stiffness but decreases the maximum relative slip at failure; (4) most of the samples present the shear failures along the interface; however, the bending shear failure prior to the interface shear failure is also observed on the concrete block for low concrete strength samples and the samples with ribs; and (5) regression method is used to develop a constitutive model of the stress-slip at the interface to describe the relationship between the shear strength with the cement plates, the concrete strength, and ribs.
materials science, multidisciplinary