Abstract:In this paper, a second-order, dual-band, band-pass frequency selective surface (FSS) with high selectivity is presented by cascading three-layers of periodic metallic arrays. The unit cell in both two exterior layers is composed of gridded-double square loops (G-DSLs) while the element in the middle layer is consisting of wire grid. The three layers are separated by two thin F4B-2 substrates with dielectric constant of 2.65 + 0.02i. The proposed FSS can provide multi-transmission poles and multi-transmission zeros. There are two transmission poles in each pass-band. The two pass-bands are separated by two transmission zeros. On the upper side of the second pass-band, other two transmission zeros are generated also. These transmission zeros lead to a wide out of band rejection and a fast fall off response on both sides of each pass-band. The simulation is implemented using full wave electromagnetic simulator CST Microwave Studio, the central frequencies of the two pass-bands are 12.7 and 17.4 GHz. In addition, the designed principle is described using equivalent circuit model (ECM). Furthermore, the prototype of the FSS is fabricated and measured. Both simulated and measured results demonstrated that the proposed FSS has the merits of incident angle stability from 0° to 60° for both TE and TM polarizations.

An Angle-Independent Frequency Selective Surface in the Optical Range

A Novel Dual-Band Frequency Selective Surface (FSS)

Broad-Band Angle Insensitive Frequency-Selective Surface With Multiple Resonant Modes

A Novel Angularly Stable Wide Passband Frequency Selective Surface

Stopband Frequency Selective Surface with Ultra-Large Angle of Incidence

A Low-Profile Angle-Insensitive Bandpass Frequency-Selective Surface Based on Vias

A Novel Miniaturized Dual-band Frequency Selective Surface

A Novel Miniaturized Aperture Hexagonal Frequency Selective Surface

Design of a Dual-Band Dual-Polarization Transparent Frequency Selective Surface

Flexible Frequency Selective Surfaces with Ultra-Large Incidence Angle

An Incident Angle Insensitive Band-Pass Frequency Selective Surface with Flat Top

Design Of A Novel Polarization Selective Frequency Selective Surface

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A Dual-Passband Frequency Selective Surface with High Angular Stability and Polarization Insensitivity

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Metamaterial-inspired Optically Transparent Active Dual-Band Frequency Selective Surface with Independent Wideband Tunability.

A Novel 3-D Frequency Selective Surface With Ultrawide Passband and High Selectivity

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Dual-polarized angle-selective surface based on double-layer frequency selective surface

High-transmittance Double-Layer Frequency-Selective Surface Based on Interlaced Multiring Metallic Mesh.

Dual-Band High Selective Frequency Selective Surface Design and Analysis