Abstract:In many combustion systems, fuel atomization and the spray breakup process play an important role in determining combustion characteristics and emission formation. Due to the ever-rising need for better fuel efficiency and lower emissions, the development of a fundamental understanding of its process is essential and remains a challenging task. The Spray-A case of the Engine Combustion Network (ECN) is considered in the study, in which liquid n-Dodecane (Spray-A) is injected at 1500 bar through a nozzle diameter of 90 μm into a constant volume vessel with an ambient density of 22.8 kg / m3 and an ambient temperature of 900 K. The unsteady Reynolds averaged Navier-Stokes (URANS) in conjunction with k-ε turbulence model is used to investigate the flow physics in a two-dimensional axisymmetric computational domain. A reduced chemical mechanism from Wang et al. [1] with 100 species and 432 reactions is invoked to represent the kinetics. The gas and liquid phases are modeled using Eulerian-Lagrangian coupled approach. The present model is validated with the experimental data as well as computational data of Pei et al. [2]. Initially, the effects of various turbulence models with modified constants are examined without introducing the breakup phenomena in the computational physics. Later on, primary and secondary breakup processes of the liquid fuel are taken into account. In the present study, we examine the effects of secondary breakup modeling on the spray under high-pressure conditions using different breakup models, including Wave, Kelvin-Helmholtz and Rayleigh-Taylor (KH-RT) and Stochastic Secondary Droplet (SSD) models. It has been observed that KH-RT model is more dominant in such high-pressure sprays and predict physics more accurately as compared to other models. The dominance of convection as well as diffusion controlled vaporization model is also realized over the diffusion controlled vaporization model. The investigations at different fuel injection pressures are also modeled and validated with the experimental data [3]. The results strongly suggest that applying high-pressure, leads to high injection velocity and momentum which enhances the air entrainment near the injector region and the mixing process.

A PRIMARY BREAKUP MODEL FOR DIESEL SPRAY BASED ON TWO-PHASE FLOW IN INJECTOR NOZZLE

Modeling and Detailed Numerical Simulation of the Primary Breakup of a Gasoline Surrogate Jet under Non-Evaporative Operating Conditions

Three-Dimensional Simulation Of Effervescent Atomization Spray

Nozzle Internal Flow and Spray Primary Breakup with the Application of Closely Coupled Split Injection Strategy

The Effect of Bubbles on Primary Breakup of Diesel Spray

The Primary Breakup and Atomization Characteristics of Liquid Jet in Crossflow at the Fixed Momentum Ratio and Weber Number

Study on Instability Breakup of Fluid Droplet in Spray Process

Experimental study on the break characteristics of diesel fuel injection by pressure

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

Simulation of Droplet-gas Flow in the Effervescent Atomization Spray with an Impinging Plate

Primary spray break-up from a nasal spray atomizer using Volume of Fluid to Discrete Phase Model

Numerical Study of the Impact on High-Pressure and Evaporating Spray Behavior of Nozzle Cavitation at Typical Diesel Engine Conditions

Multiscale Simulation of Liquid Jet Breakup in Swirling Crossflows: Breakup Mechanism and Spray Structures

Spray Trajectory and 3D Droplets Distribution of Liquid Jet in Crossflow with Digital Inline Holography

Numerical Simulations of Liquid Film Primary Breakup in a Pintle Injector: a Parametric Study

Segment-based Eulerian-Lagrangian transition method for flat nozzle spray atomization simulation

Numerical Models For Viscoelastic Liquid Atomization Spray

Simulations of Non-Reacting Transient N-Dodecane Spray in a High-Pressure Combustion Vessel

Numerical Simulations of Molten Breakup Behaviors of a de Laval-Type Nozzle, and the Effects of Atomization Parameters on Particle Size Distribution

Eulerian–Lagrangian modeling of spray G atomization with focus on vortex evolution and its interaction with cavitation

Primary breakup model development for trajectory prediction of liquid jets in subsonic crossflow