Abstract:In many combustion systems, fuel atomization and the spray breakup process play an important role in determining combustion characteristics and emission formation. Due to the ever-rising need for better fuel efficiency and lower emissions, the development of a fundamental understanding of its process is essential and remains a challenging task. The Spray-A case of the Engine Combustion Network (ECN) is considered in the study, in which liquid n-Dodecane (Spray-A) is injected at 1500 bar through a nozzle diameter of 90 μm into a constant volume vessel with an ambient density of 22.8 kg / m3 and an ambient temperature of 900 K. The unsteady Reynolds averaged Navier-Stokes (URANS) in conjunction with k-ε turbulence model is used to investigate the flow physics in a two-dimensional axisymmetric computational domain. A reduced chemical mechanism from Wang et al. [1] with 100 species and 432 reactions is invoked to represent the kinetics. The gas and liquid phases are modeled using Eulerian-Lagrangian coupled approach. The present model is validated with the experimental data as well as computational data of Pei et al. [2]. Initially, the effects of various turbulence models with modified constants are examined without introducing the breakup phenomena in the computational physics. Later on, primary and secondary breakup processes of the liquid fuel are taken into account. In the present study, we examine the effects of secondary breakup modeling on the spray under high-pressure conditions using different breakup models, including Wave, Kelvin-Helmholtz and Rayleigh-Taylor (KH-RT) and Stochastic Secondary Droplet (SSD) models. It has been observed that KH-RT model is more dominant in such high-pressure sprays and predict physics more accurately as compared to other models. The dominance of convection as well as diffusion controlled vaporization model is also realized over the diffusion controlled vaporization model. The investigations at different fuel injection pressures are also modeled and validated with the experimental data [3]. The results strongly suggest that applying high-pressure, leads to high injection velocity and momentum which enhances the air entrainment near the injector region and the mixing process.

Numerical Study of the Impact on High-Pressure and Evaporating Spray Behavior of Nozzle Cavitation at Typical Diesel Engine Conditions

A Numerical Study of the Effects of Pressure Fluctuations Inside Injection Nozzle on High-Pressure and Evaporating Diesel Spray Characteristics

Simultaneous high-speed internal and external flow measurements for a high-pressure diesel nozzle

The Effect of Bubbles on Primary Breakup of Diesel Spray

Experimental study on influence of pressure fluctuation and cavitation characteristics of nozzle internal flow on near field spray

Effect of Cavitation inside the Diesel Nozzle on the Spray Characteristics

Experimental study on microscopic characteristics of impinging spray at elevated ambient pressure conditions during development

Nozzle Internal Flow and Spray Primary Breakup with the Application of Closely Coupled Split Injection Strategy

An Experimental and Numerical Study of Diesel Spray Impingement on a Flat Plate

Experimental Investigation and Numerical Modeling of Spray Combustion and Emission in a Diesel Engine

Numerical Simulation of Internal Flow in Diesel Conical Spray Injector

Direct numerical simulation of three-dimensional swirling n-heptane spray flames

Simulations of Non-Reacting Transient N-Dodecane Spray in a High-Pressure Combustion Vessel

Numerical Study on Internal Nozzle Flow Characteristic of Injector under Hot Fuel Conditions

Modeling and Detailed Numerical Simulation of the Primary Breakup of a Gasoline Surrogate Jet under Non-Evaporative Operating Conditions

Numerical Simulation of the Collision Behaviors of Binary Unequal-Sized Droplets at High Weber Number

Numerical Investigation of Combustion and Emission With Different Diesel Surrogate Fuel by Hybrid Breakup Model

Research Progress for Influence of Nozzle Geometry on Spray Beam and Diesel Engine Performance

Numerical Simulation of Conical Spray on Diesel Engine with Various Injection Strategies

Effects of nozzle hole size and rail pressure on diesel spray and mixture characteristics under similar injection rate profile – experimental, computational and analytical studies under non-evaporating spray condition

Schlieren and mie-scattering visualization of an evaporating spray under marine diesel engine conditions