Abstract:In order to deeply study the mechanism of prestressed anchor anti-slide pile, an indoor model experimental device was developed, and a finite difference and particle flow numerical analysis model of slope anchor cable anti-slide pile was established based on the reinforcement project of prestressed anchor cable anti-slide pile in a mountain road slope. Based on the analysis of the force and displacement characteristics of the anti-slide pile, the influence of the prestress of the anchor cable, the inclination angle of the anchor cable, the width and column spacing of the anti-slide pile and the inclination angle of the landslide, the height and nature of the filling soil on the force and deformation characteristics of the pile are discussed, and some design parameters are optimized. Results show that the larger the prestress of the anchor cable, the smaller the displacement of the pile body, but the excessive stress is not conducive to the safety of the pile body. The optimal tension should be 50–70% of the designed tension of the anchor cable. With the increase in the inclination angle of the anchor cable, the displacement of the pile decreases first and then increases, and there is an optimal inclination angle of the anchor cable. In the double row piles, with the increase in pile spacing, the front row piles gradually change from supporting the soil between the double row piles to supporting the sliding body with the back row piles, and the double row piles are plum-shaped. When the pile spacing is 2.5 times the pile diameter, the force of the front and rear piles is the most reasonable. In the process of soil arching evolution, the influence of cohesion on the soil arching effect is greater than that of the internal friction angle.

Study of Built-in Depth of Anchored Piles Against Landslide

Calculation of Earth Pressure Considering Time and Arching Effect on Pile-Anchor Supporting Structure

An Improved Model for the Horizontal Dynamic Response of Piles in Saturated Soil

STUDY ON PILE LONGITUDINAL VIBRATION CONSIDERING EFFECT OF UNDERGROUND WATER LEVEL

INFLUENCE OF ANCHORAGE DEPTH ON MECHANICAL BEHAVIOUR OF DOUBLE-ROW ANTI-SLIDE PILES

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

Analytical Elastoplastic Solutions of Laterally Loaded Long Piles

STUDY ON SINGLE RIGID PILE GROUND IMPROVEMENT MODEL UNDER EMBANKMENT

The Principle of Pile-soil Interaction Applied to Reinforce Pile Accident

Model tests on characteristics of ocean and offshore elevated piles with large lateral deflection

Assessment of Cohesive Soil Landslide Driving Forces Exerted on Piles Considering Soil Arching Effects

Monitoring and Calculation of Anti-Slide Piles Internal Force

Comparative Study Of Anchor Double-Row Piles And Frame Double-Row Piles

A Displacement-Based Method for Evaluating the Stability of a Pile-Stabilized Slope

Displacement evolution of a creeping landslide stabilized with piles

New Interaction Model for the Annular Zone of Stepped Piles with Respect to Their Vertical Dynamic Characteristics

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Estimation of internal force of stabilizing piles on landslides considering nonlinear landslide thrust and soil resistance

Model test study of bridge pile horizontal bearing behavior under landslide deformation

Stability Analysis of Slopes Supported by Anti-slip Piles under Different Working Conditions

Analysis of Influence Factors of Anti-Slide Pile with Prestressed Anchor Cable Based on Bearing and Deformation Characteristics of Pile Body