Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Synthesis, Characteristic, and Flammability of Modified Carbon Nanotube/Poly(Ethylene-Co-Vinyl Acetate) Nanocomposites Containing Phosphorus and Silicon

Thermal and Flame Retardant Properties of Ethylene‐vinyl Acetate Copolymer/modified Multiwalled Carbon Nanotube Composites

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Synthesis, Characteristic of a Novel Flame Retardant Containing Phosphorus, Silicon and Its Application in Ethylene Vinyl-Acetate Copolymer (EVM) Rubber

A Phosphorus-Nitrogen Containing Dendrimer Reduces The Flammability Of Nanostructured Polymers With Embedded Self-Assembled Gel Networks

Study on the Flame Retardancy of Evm/Magnesium Hydroxide Composites Optimized with A Flame Retardant Containing Phosphorus and Silicon

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Synergistic effects and mechanism of multiwalled carbon nanotubes with magnesium hydroxide in halogen-free flame retardant EVA/MH/MWNT nanocomposites

Functionalized Carbon Nanotubes with Phosphorus- and Nitrogen-Containing Agents: Effective Reinforcer for Thermal, Mechanical, and Flame-Retardant Properties of Polystyrene Nanocomposites

Preparation and Characterization of DOPO-Functionalized MWCNT and Its High Flame-Retardant Performance in Epoxy Nanocomposites

Effects of silane-modified multiwalled carbon nanotubes and 9,10-dihydro-9-oxa-10 phosphaphenanthrene-10-oxide on the flame retardancy and mechanical properties of bismaleimide resin

Implanting MOF Co-doped carbon nanotubes into PVP as flame-retardant to fabricate high performance PVA/SA aerogel nanocomposites

Carbon Nanotube Bridged Cerium Phenylphosphonate Hybrids, Fabrication and Their Effects on the Thermal Stability and Flame Retardancy of the HDPE/BFR Composite

Study on the flame retardancy of high impact polystyrene composites filled with organic-modified carbon nanotubes

Flame Retardancy and Dispersion of Functionalized Carbon Nanotubes in Thiol-Ene Nanocomposites

Covalent Functionalization of Carbon Nanotubes with Polyhedral Oligomeric Silsequioxane for Superhydrophobicity and Flame Retardancy

Functionalized CNTs with DOPO and Silicon Containing Agents: Effective Reinforcer for Thermal and Flame Retardant Properties of Polystyrene Nanocomposites

Enhancing flame retardant and antistatic properties of polyamide 6 by a grafted multiwall carbon nanotubes

Combination of Black Phosphorus Nanosheets and MCNTs Via Phosphoruscarbon Bonds for Reducing the Flammability of Air Stable Epoxy Resin Nanocomposites.

Synthesis, Characteristic of a Novel Flame Retardant Containing Phosphorus and Its Application in Poly(ethylene‐co‐vinyl Acetate)