Abstract:The combination of nitrogen and phosphorus compounds has synergistic flame retardant effect, but the addition of low phosphorus content compounds is large, which affects the mechanical properties of polymers. Phosphorus ammonium polyphosphate (APP) with high phosphorus content and graphitic carbon nitride (g-C 3 N 4 ) doped with SiO 2 were used for the flame retardant (CN-Si-APP) of polyamide 6 (PA6). CN-Si-APPs with different APP/CN mass ratio (1, 2.5 and 4) and dosage (7 and 12 wt%) were blended with PA6 via a twin-screw extruder, and their flame retardancy was investigated by limiting oxygen index (LOI), UL-94 test, muffle furnace carbonization test and raman spectroscopy. When only APP added, the coefficient of water absorption (CWA) of composites increased and its tensile strength greatly reduced by nearly 37.1% to 35.39 MPa. The addition of g-C 3 N 4 inhibited the water absorption. When the addition dosage is 7%, the CWA of PA6/APP, PA6/CN-Si-APP2.5, PA6 and PA6/CN were 11.1, 6.86, 5.78 and 4.6%, respectively. SiO 2 effectively improved the dispersion of g-C 3 N 4 and the mechanical properties of composites. Thermogravimetric analysis (TGA) showed that the char residue of PA6 composites was improved significantly. The composite with 7 wt% CN-Si-APP4 passed the UL-94 V-0 rating. The LOI value and graphitization degree (I D /I G ) of PA6/12 wt% CN-Si-APP2.5 reached 28.7% and 2.93 respectively. Under the same dosage, the graphitization degree of CN-Si-APP2.5 (3.51) was higher than that of g-C 3 N 4 (3.98). The barrier protection of g-C 3 N 4 , catalytic effect of APP and SiO 2 crosslinking network promoted PA6 to form a dense and stable char layer, which protected PA6 composites from the flame. The strategy of synergistic flame retardant in this paper provides a valuable solution for reducing the amount of flame retardant.

Enhancing flame retardant and antistatic properties of polyamide 6 by a grafted multiwall carbon nanotubes

Hindered phenol grafted carbon nanotubes for enhanced thermal oxidative stability of polyethylene

Enhancing the flame retardancy and UV resistance of polyamide 6 by introducing ternary supramolecular aggregates

Effect of Multiwalled Carbon Nanotubes and Phenethyl-Bridged DOPO Derivative on Flame Retardancy of Epoxy Resin

Simultaneously Improved Electromagnetic Interference Shielding and Flame Retarding Properties of Poly (butylene Succinate)/thermoplastic Polyurethane Blends by Constructing Segregated Flame Retardants and Multi-Walled Carbon Nanotubes Double Network

Multi-walled Carbon Nanotubes Encapsulated by Graphitic Carbon Nitride with Simultaneously Co-Doping of B and P and Ammonium Polyphosphate to Improve Flame Retardancy of Unsaturated Polyester Resins

Tertiary nitrogen carbonization and imine cross‐linking facilitated solid‐phase flame retardant for anti‐dripping PA6 fiber

P, N-decorated halloysite nanotubes for flame retardancy enhancement of polyamide 6/aluminum diethylphosphinate

Synergistic effect of graphitic carbon nitride and ammonium polyphosphate on the enhanced flame retardant and smoke suppression properties of biobased polyamide 56

Functionalized Carbon Nanotubes with Phosphorus- and Nitrogen-Containing Agents: Effective Reinforcer for Thermal, Mechanical, and Flame-Retardant Properties of Polystyrene Nanocomposites

Facile preparation of inherently flame-retardant polyamide 6 filaments with enhanced anti-dripping enabled by the synergistic charring effect

Effects of silane-modified multiwalled carbon nanotubes and 9,10-dihydro-9-oxa-10 phosphaphenanthrene-10-oxide on the flame retardancy and mechanical properties of bismaleimide resin

Synergistic Effect Between Carbon Nanoparticle and Intumescent Flame Retardant on Flammability and Smoke Suppression of Copolymer Thermoplastic Polyurethane

Improving flame retardancy and mechanical properties of polyamide 6 induced by multiple reactions among flame retardants and matrix

Effect of different IFS (MWCNTs, BN, and ZnO) on flame retardant, thermal and mechanical properties of PA6/aluminum diisobutyl phosphinate composites

A Strategy Toward Improving Flame Retardancy and Thermal Oxidative Stability of Polyamide 6 Based on Cuprous Diethylphosphinate

Synergistic effect of SiO2 doped g-C3N4 and ammonium polyphosphate on flame retardancy of PA6 composites

A phosphorus-containing flame retardant with thermal feature suitable for polyamide 6 and its filaments with enhanced anti-dripping performance

Effect Of Graphite On The Flame Retardancy And Thermal Conductivity Of P-N Flame Retarding Pa6

Flame Retarding Mechanism of Polyamide 6 with Phosphorus‐nitrogen Flame Retardant and DOPO Derivatives

Synergistic flame‐retardancy of lamellar cerium phenylphosphonate and aluminum diethylphosphinate towards suppressing "candlewick effect" of polyamide 6/carbon fiber composites