Evaluation method of modification effect of direct-to-plant SBS modifier on asphalt
Wengang Zhang,Xiyao Yu,Di Wu,Bochen Song,Xueyun Cao,Zhen Xing,Yubin Zhang,Xiang Yan,Xiaoping Ji,Kui Hu,Lilong Cui
DOI: https://doi.org/10.1016/j.conbuildmat.2024.135569
IF: 7.4
2024-03-01
Construction and Building Materials
Abstract:To accurately evaluate the modification effect of direct-to-plant styrene–butadiene–styrene block copolymer (SBS) modifier on asphalt, a collection method for direct-to-plant SBS-modified asphalt was proposed in this paper, the qualitative and quantitative evaluation index system was established, and the feasibility of quantitative evaluation based on fluorescence microscopy images and visual inspection of the mixing effect was evaluated, the feasibility of quantitative evaluation indicators was also verified based on the asphalt indicators, rheological properties, and asphalt mixtures's pavement performances. The research results indicate that based on fluorescence microscopy images, by observing the distribution and swelling state of direct-to-plant SBS modifiers can qualitatively evaluate the modification effect of direct-to-plant SBS modifiers on asphalt. Based on the visual inspection of the mixing effect, observe the size and quantity of unmelted particles, determine the melting state of the direct-to-plant SBS modifier, and its modification effect on asphalt can be qualitatively evaluated. For the same direct-to-plant SBS-modified asphalt, the percentage of rotation viscosity between direct-to-plant SBS-modified asphalt and traditional SBS-modified asphalt at 135 ℃ ( DA η ( 135 ℃ ) ) and discrete coefficient of 135 ℃ rotational viscosity of direct-to-plant SBS-modified asphalt ( CV η ( 135 ℃ ) ) exhibit a linear relationship with direct-to-plant SBS-modified asphalt's penetration, softening point, and ductility, the smaller the CV η ( 135 ℃ ) , the greater the DA η ( 135 ℃ ) . The smaller the CV η ( 135 ℃ ) (the larger the DA η ( 135 ℃ ) ), the larger the dynamic shear modulus ( G * ), the smaller the phase angle ( δ ), and the larger the rutting factor ( G * / sin δ ) at the same scanning temperature. The relationship between CV η ( 135 ℃ ) ( DA η ( 135 ℃ ) ) and direct-to-plant SBS modifier on the main technical indicators and rheological performance indicators of asphalt is relatively stable. There is a clear relationship between CV η ( 135 ℃ ) ( DA η ( 135 ℃ ) ) and the high-temperature stability, low-temperature crack resistance, and water stability of direct-to-plant SBS-modified asphalt mixture, all of which show that as CV η ( 135 ℃ ) decreases ( DA η ( 135 ℃ ) increases), the pavement performances improve.
construction & building technology,materials science, multidisciplinary,engineering, civil