Abstract:Many subsea structures have non-uniform geometries, which extend only a finite distance above the seabed. To better understand local scour at these structures, this paper presents scour measurements from an experimental study of submerged compound piles comprised of a circular superstructure supported by a circular foundation. The experiments were conducted in the clear-water regime and considered the effect of three different ratios describing the structural geometry: (i) the overall height of the compound structure above the initial bed level to the diameter of the super-structure <math>h1/D1</math>; (ii) the height of the foundation exposed above the initial bed level relative to the overall height of the superstructure <math>h2/h1</math>; and (iii) the diameter of the foundation to that of the superstructure <math>D2/D1</math>. In all cases <math>D2≥D1</math> and <math>h1≥h2≥0</math> (i.e. the foundation and superstructure where never buried). The experimental results indicate that, if all other parameters are held constant, the non-dimensional equilibrium scour depth <math>S0/D2</math> increases with both <math>h1/D1</math> and <math>h2/h1</math>, and decreases as <math>D2/D1</math> increases. To quantitatively explain these trends the experimental results are compared with a range of existing methods to predict scour depth for non-uniform (or complex) surface piercing piles. Of these methods it is found that an effective pile height and an effective pile diameter, computed using simple geometric arguments, give good agreement. The concept of effective height is also shown to collapse time-scale measurements of the scour process convincingly across the full range of experimental results and to explain the extent and shape of the local scour hole reasonably well. Collectively, these findings suggest that the calculation of an effective height may be used to provide a reasonable first approximation to estimate the rate and extent of local scour around submerged compound structures.

Experimental and numerical investigation of local scour around a submerged vertical circular cylinder in steady currents

Effect of Inclination Angles on the Local Scour Around a Submerged Cylinder

An Experimental Study on the Scour Around a Vertical Cylinder in Tidal Flow

Study of local scour around rectangular and square subsea caissons under steady current condition

Experimental study of local scour around submerged compound piles in steady current

Time Development of Scour Around Pile Groups in Tidal Currents

Experimental investigation of local scour around cylindrical pile foundations in a double-layered sediment under current flow

Scour characteristics at the periphery of a vertical pile under steady flow

Numerical investigation of local scour around tandem piers using proposed self-sustaining inlet turbulent boundary conditions

Scour around the single emergent cylinder due to subcritical and supercritical approach flow conditions

3D Numerical Modeling of Flow and Scour Around a Circular Pile

Numerical Modeling of Scour and Deposition Around Permeable Cylindrical Structures

Numerical Investigation of Local Scour Around Three Adjacent Piles with Different Arrangements under Current

Physics of Flow and Local Scour Depth Around Spur Dikes

Investigation of local scour around two vertical piles by using numerical method

Experimental investigation of local scour around complex bridge pier of sea-crossing bridge under tidal currents

Experimental investigation on scour topography around high-rise structure foundations

Numerical Simulation of Local Scour and Flow Field Around Pipelines

Simulation of Scour Around a Vibrating Pipe in Steady Currents

Numerical investigation of local scour around a vibrating pipeline under steady currents

Three-Dimensional Numerical Modeling of Pier Scour Under Current and Waves Using Level-Set Method