Abstract:Parallel microchannels have been widely used in cooling of compact electronic equipment due to large contact area with liquid and availability of large mass of fluid to carry away heat. However, understanding of flow distribution for microchannel parallel system is still unclear and there still lack of studies give a clear pictures to understand the complex flow features which cause the flow maldistribution. Generally, the geometrical structure of the manifold and micro channels play an important role in flow distribution between micro channels, which might affects the heat and mass transfer efficiency, even the performance of micro exchangers. A practical design of exchanger basically involves the selection of an optimized solution, keeping an optimal balance between gain in heat transfer and pressure drop penalty. A parallel microchannels configurations consisting inlet and outlet rectangular manifold were simulated to study flow distribution among the channels were investigated numerically by using Ansys Fluent 14.5. The numerical results was validated using existing experimental data and showed a similar trend with values 1% higher than experimental data. The influence of inlet/outlet manifold area and inlet/outlet arrangement on flow distribution in channels were carried out in this study. Based on the predicted flow non-uniformity value, 𝜙, Z- type flow arrangement exhibits higher value of 𝜙, which is 8%, followed by U-type, 2.6% and the I-type, 2.49%. Thus, a better uniformity of velocity and temperature distributions can be achieved in I-shape flow arrangement. The behavior of the flow distributions inside channels is due to the vortices that occurred at manifold. Besides comparing the pressure drop for case 1(D1) and case 2(D2), it is worth to mention that, as the area of inlet and outlet manifold decrease by 50%, the pressure drop is increasing about 5%. However, the inlet/outlet area of manifold on velocity and fluid temperature distributions was insignificant.

Numerical Simulation of Velocity Distribution among Microchannels with Bifurcation Structures As Manifolds

Numerical and Experimental Investigation of Mixing Characteristics in the Constructal Tree-Shaped Microchannel

Enhanced Stability of Flows Through Contraction Channels: Combining Shape Optimization and Linear Stability Analysis

CFD and Experimental Analyses of Flow Distribution Uniformity in Minichannel Reactors with a Bifurcation Structure Manifold

Numerical Computations of the Flow in A Finite Diverging Channel

Numerical Analysis on the Effect of Bifurcation Angle and Inlet Velocity on the Distribution Uniformity Performance of Consecutive Bifurcating Fluid Flow Distributors

Flow Manifold Optimization for a Uniform Velocity Distribution in a Laminated Microreactor with Micro‐Pin‐Fin Arrays

WALL EFFECTS ON FLOWS PAST TWO TANDEM CYLINDERS OF DIFFERENT DIAMETERS

Interface-resolved Numerical Simulations of Particle-Laden Turbulent Flows in a Vertical Channel Filled with Bingham Fluids

Numerical Simulation of the Scalar Mixing Characteristics in Three-dimensional Microchannels

Numerical Research on the Fiber Suspensions in a Turbulent T-shaped Branching Channel Flow

NUMERICAL STUDY OF THE EFFECT OF AREA OF MANIFOLD AND INLET/OUTLET FLOW ARRANGEMENT 0N FLOW DISTRIBUTION IN PARALLEL RECTANGULAR MICROCHANNEL COOLING SYSTEM

Taylor bubble splitting, flow and coalescence in branching microchannels: An experimental and numerical simulation study

Numerical Investigation on the Performance of a Honeycomb-Shaped Channel

Effects of Manifold Designs on Flow and Thermal Performances of Microchannel Heat Sink

Exploring fluid flow in microchannels with branching and variable constrictions

A Numerical Study of Subcooled Flow Boiling in a Manifold Microchannel Heat Sink with Varying Inlet-to-outlet Width Ratio

Morphology Effect of Surface Structures on Microchannel Flow Using Lattice Boltzmann Method

Roughness Effect on Flow and Thermal Boundaries in Microchannel/nanochannel Flow Using Molecular Dynamics‐continuum Hybrid Simulation

Investigation of flow and heat transfer performance of the manifold microchannel with different manifold arrangements

Bifurcations in flows of complex fluids around microfluidic cylinders