Abstract:The migration characteristics of heavy metals during the melting process were one of the key factors for safe treatment and resource utilization of incineration fly ash (IFA). In this paper, the material variation of heavy metal elements of Pb, Zn, Cu, and Fe during the IFA melting process was simulated by HSC 6.0 chemistry software. The effects of melting temperature, alkalinity, atmosphere, chlorine content of raw materials, and an iron bath added to the migration characteristics, and phase transformation of selected heavy metal elements was investigated. The simulation results were also verified by experimental results. The results showed that, with the increase in temperature, the gas phase proportion of Pb, Zn, Cu, and Fe gradually increased. The alkalinity had little effect on the proportion of elements Fe and Cu in the liquid slag (LS) phase and the element Pb in the gas phase, but the increase in alkalinity could inhibit the proportion of element Zn in the gas phase. Zn mainly existed in the gas phase, and the atmosphere had little influence on the distribution of Zn. In reducing atmosphere (RA), elements Fe and Cu, which entered the liquid metal (LM) phase, were promoted, while the volatilization of Pb was restrained, which was conducive to the recovery of heavy metals. The melting process of IFA with water-washing and dechlorination had an inhibitory effect on the volatilization of Zn and Pb, but had little effect on Fe and Cu. The proportion of element Zn in the gas phase reduced from 85.84% to 9.89%. With the iron bath added in the IFA melting process, 98.42% of Cu and 82.28% of Pb entered the LM phase as metal simple substances, and 76.3% of Zn entered the gas phase as Zn (g) and ZnCl2 (g). In the experimental verification, the distribution proportions of the four heavy metals in the gas phase, LS phase, and LM phase were consistent with the simulation results.

Partition of Heavy Metals for the Fly Ashes from MSW Incinerator Before and after Melting Treatment

Characteristics of Heavy Metals Partition During Melting Process of MSWI Fly Ash

Impacts on the Separation of Heavy Metals in Municipal Solid Waste (msw)incineration Fly Ash Melting Process

Swirling Melting Characteristics of Fly Ashes from Co-Firing of MSWI in China

Experimental analysis of heavy metals behavior during melting process of fly ashes from MSWI under different atmospheres

Thermodynamic and Experimental Study on Migration Characteristics of Heavy Metals during the Melting Process of Incineration Fly Ash

Metallurgical Characteristics of Fly Ash from Municipal Solid Waste Incineration

Melting Characteristics During the Vitrification of MSW Incinerator Fly Ash by Swirling Melting Treatment

Study on the Migration of Heavy Metals in the Melting Process of Fly Ash in Waste Incineration

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

The distribution of heavy metals in MSWI fly ash molten flue gas

Immobilization Mechanism of Heavy Metals by Crystals and Liquid Phase During Melting Treatment of MSWI Fly Ash

The migration and distribution of heavy metals in melting flue gas during the melting process of MSWI fly ash

Experimental Study on Influence of Fly Ash in Melting Process on Heavy Metal Speciation

Distribution of Heavy Metals from Iron Bath‐melting Separation Process Applied to Municipal Solid Waste Incineration Fly Ash

Influence of SiO_2 Additive on Melting Characteristics from MSW Incinerator Fly Ashes

An Experimental Study on the Melting Solidification of Municipal Solid Waste Incineration Fly Ash

Progress in Characteristics of Heavy Metals During Melting of Fly Ashes from Municipal Solid Waste Incinerator

Partitioning of Heavy Metals in Municipal Solid Waste Pyrolysis, Gasification, and Incineration

Investigation of Heavy Metal Partitioning Influenced by Flue Gas Moisture and Chlorine Content During Waste Incineration

Vitrification of MSWI Fly Ash by Thermal Plasma Melting and Fate of Heavy Metals