Abstract:Compared with the direct force measurement of cables, dynamic modal testing is more economic and applicable in engineering for monitoring the stiffness change of cable net structures caused by pretension deviation. Normally, it is sufficient to detect the variation of structural key stiffness by testing a few modes (target modes) that are, however, likely located in the region of dense modes. To effectively evaluate the stiffness of an existing cable net structure, the identification accuracy of these target modes should be improved when using conventional time-domain methods, e.g., the eigensystem realization algorithm (ERA). Structural free vibration can be induced by a step excitation that is generated by simultaneously releasing loads hung on the cable net. In this paper, the modal energy in the structural free vibration response is expounded to be determined by the work done by the step excitation loads in the direction of this mode shape. Therefore, the identification accuracy of a target mode can be improved by optimizing the layout and magnitude of the suspended loads to increase its energy proportion in the structural free vibration response and suppress those of its adjacent modes. For a certain set of degrees of freedom (DOFs) that loads are allowed to be suspended, a method is put forward to construct a step excitation load that can guarantee that the suppressed modes do not have an energy contribution to its induced free vibration. Referring to the effective independence (EI) method, an iterative algorithm is developed to select a given number of DOFs for the suspension of the step excitation loads that can ensure the target mode has a relatively large energy proportion. With the solution of generalized Rayleigh entropy, the magnitude of the loads suspended from the selected DOFs is further optimized to achieve the maximum energy proportion of the target mode. An illustrative saddle-shaped cable net roof is employed to validate the accuracy and validity of the proposed method by comparing the modal identification results under the optimized step excitation, conventional impact excitation and random excitation, respectively.

Cable Modal Parameter Identification. I: Theory

Damping Parameter Identification Of Large Span Cable-Stayed Bridges

Cable Modal Parameter Identification. Ii: Modal Tests

Modal Testing and Detection of Pretension Deviation in a Cable Dome Structure

Estimation of damping matrices of cable-stayed bridges based on known data of modal damping

INVESTIGATION OF DAMPING MATRICES ACCURATE ESTIMATION OF CABLE-STAYED BRIDGES BASED ON NON-PROPORTIONAL DAMPING

IDENTIFICATION FOR DYNAMIC STIFFNESS AND MODAL PARAMETER OF CABLES

Nonlinear Dynamic Response of Stay Cables under Axial Harmonic Excitation

STUDY ON CHARACTERISTICS OF MODAL DAMPING OF STEEL AND CFRP STAY CABLES

In-plane free vibrations of small-sag inclined cables considering bending stiffness with applications to cable tension identification

Self-excited Oscillation Analysis of a Taut Cable under Wind Loading

Vibration-Based Damage Detection Of Cable-Stayed Bridges

PARAMETRICALLY EXCITED INSTABILITY OF A CABLE UNDER TWO SUPPORT MOTIONS

Monitoring-based identification of nonlinear aerodynamic damping in multi-mode vortex-induced vibrations of a stay cable

Monitoring of the Internal Force of the Flexible Components by Vibration Method

Parametrically Excited Instability Analysis of a Semi-Actively Controlled Cable

EXPERIMENTAL STUDY ON VIBRATION MITIGATION OF A STAY CABLE USING NONLINEAR HYSTERETIC DAMPERS

A Step Excitation Optimization Method for Intensive Modal Identification of Cable Net Structures

Free vibration of a taut cable with internal high damping rubber dampers and an external negative stiffness damper

Parametric Vibration and Vibration Reduction of Cables in Cable-Stayed Space Latticed Structure

Dynamic Behaviors of a Two‐Cable Network With Two Negative Stiffness Dampers and a Cross‐Tie