Numerical study of a chemical looping combustion system: Effects of fuel type and particle size distributions on the operating performance
Yali Shao,Yancheng Hu,Xudong Wang,Baosheng Jin,Ramesh K. Agarwal
DOI: https://doi.org/10.1016/j.cej.2024.156476
IF: 15.1
2024-10-19
Chemical Engineering Journal
Abstract:Chemical looping combustion (CLC) using biomass offers a promising pathway for achieving negative carbon emissions. However, the different properties of coal and biomass affect reaction performance, which has not been fully explored in the CLC system. Additionally, the effects of particle size distributions (PSDs) of solid fuels and oxygen carriers (OCs) are inadequately addressed. In this study, a 3D reactive model using the computational particle fluid dynamics (CPFD) method is developed to investigate the effects of PSDs of both solid fuels and oxygen carriers on operating performance with coal and biomass as fuels. Results indicate that the average residence time in FR of coal and biomass particles is 0.86 s and 0.68 s, respectively, but biomass outperforms coal in reaction efficiency. For coal-fueled CLC, the average residence time is 0.46 s for coal particles with diameters of 100–200 μm, whereas it reaches 0.86 s for coal diameters of 300–700 μm. However, the reaction performance is better with smaller coal sizes due to char gasification being the rate-limiting step. In comparison, for biomass-fueled CLC, the reaction efficiency remains consistent across various particle sizes under the specified conditions due to the rapid release of volatile components and the low content of char. Additionally, it is found that the OC conversion ratio is mainly determined by their residence time in the zones with relatively higher concentrations of the combustible gas in FR. Employing OCs with overly wide PSDs such as 300–800 μm can compromise the material seal above the AR, increase the risk of gas leakage and decrease the separation efficiency of the inertial separator.
engineering, chemical, environmental