Abstract:Human error is one of the leading factors in nuclear accidents. However, on-line monitoring may help operators to detect and locate the abnormality on time, and thus it has the benefit of reducing misoperation, improve the safety of nuclear power plants and guide the maintenance plan. This work presents a distributed on-line monitoring and fault detection methodology based on modeling and simulation of nuclear plant’s sub-units. This methodology utilizes quantitative calculation from the simulation model and combines the measurements gotten from instrumentation and control system to detect incipient faults. Under normal operation, the method allows real-time tracking to set dynamic thresholds. When a failure occurs, the corresponding parameters can be compared to detect the fault. Furthermore, the root cause, fault type and degree of the fault could be identified and calculated while considering compensation from the control system and trends of measurements. The performance of this method was evaluated and verified by applying it to the Reactor Coolant System of a PWR and comparing its result with the one obtained from Principal Component Analysis (PCA) method. The result of simulation analysis under steady operation and transients separately show the effectiveness and accuracy of this methodology when compared with PCA method; therefore, laying an essential foundation for the prediction of fault trends.

Complexity-Based Pattern Recognition and Diagnosis for Engineering; Simulation System of Htr-Pm

Nonlinear model predictive control of HTR-PM load changing process

Simultaneous Approach for Simulation of A High-Temperature Gas-Cooled Reactor

A Simulation Method for Nuclear Power Plant with High-Temperature Gas-Cooled Reactor

The Engineering Simulation System for HTR-PM

Dynamic simulation and optimization of load change operation of high-temperature gas-cooled reactor pebble-bed module

Numerical simulation of typical abnormal operating conditions in the secondary circuit system of a Hua-long Pressurized Reactor nuclear power unit

Operation and Control Simulation of a Modular High Temperature Gas Cooled Reactor Nuclear Power Plant

Study on Graphical Modeling and Simulation for the Chinese 200Mwe HTR-PM

Identification-based Sensor and Actuator Fault Diagnosis for Industrial Control Systems and Its Application to HTR-PM

Coupled Neutron Dynamic and Thermal Hydraulic Models of the HTR Simulator

Modeling and Simulation of the Multi-module High Temperature Gas-cooled Reactor

Thermal Hydraulic Analysis of High-Temperature Gas-Cooled Reactor Pebble-Bed Module Using a Systematic Parameter Estimation Approach

Coordinated Control System Design and Verification of HTR-PM Plant

Simulation of Thermal-Hydraulic Process in Reactor of HTR-PM Based on Flow and Heat Transfer Network

A Nodal Dynamic Model For Control System Simulation Of The Htr-Pm Reactor Core

Study on Graphical Modeling and Simulation of Secondary Loop in HTR-PM

HTR-PM Simulation Analysis of Accident Conditions Based on Vpower Platform

Real-time simulations to enhance distributed on-line monitoring and fault detection in Pressurized Water Reactors

Modeling and Analysis of Engineering Simulator for HTR-PM Based on THERMIX/BLAST Code and Vpower Simulation Platform

Thermal Hydraulic Simulation of Reactor of Htr-Pm Based on Thermal-Fluid Network and Simple Algorithm