Abstract:A non-isothermal ageing process was proposed for an Al-Zn-Mg-Cu alloy aiming to accommodate the slow heating/cooling procedure during the ageing of large components. The evolution of microstructure and microchemistry was analyzed by using transmission electron microscopy, high-angle annular dark field imaging, and energy dispersive spectrometry. The age-hardening of the alloy was examined to evaluate the strengthening behavior during the non-isothermal process. The corrosion behavior was investigated via observing the specimens immersed in EXCO solution (solution for Exfoliation Corrosion Susceptibility test in 2xxx and 7xxx series aluminum alloys, referring ASTM G34-01). Secondary precipitation was observed during the cooling stage, leading to increased precipitate number density. The distribution of grain boundary precipitates transits from discontinuous to continuous at the cooling stage, due to the secondary precipitation’s linking-up effect. The solutes’ enrichment on grain boundary precipitates and the depletion in precipitate-free zones develops during the heating procedure, but remains invariable during the cooling procedure. The corrosion in NIA (Non-isothermal Ageing) treated specimens initiates from pitting and then transits to intergranular corrosion and exfoliation corrosion. The transition from pitting to intergranular corrosion is very slow for specimens heated to 190 °C, but accelerates slightly as the cooling procedure proceeds. The transition to exfoliation corrosion is observed to be quite slow in all specimens in non-isothermal aged to over-aged condition, suggesting a corrosion resistance comparable to that of RRA condition.

Effect of Aging on Mechanical Properties and Localized Corrosion Behaviors of Al-Cu-Li Alloy

Effects of Aging Time on Corrosion Behavior of an Al-Cu-Li Alloy

Influence of Aging on Corrosion Behavior of 2195 Al-Li Alloy

Effect of Ageing Treatment on Local Corrosion Behavior and Microstructure of 2A97 Al-Li Alloy

Influence of Aging Treatment on the Corrosion Susceptibility and Mechanical Properties of Peak-Aged 2195 Al-Cu-Li Alloy

Effect of Aging Time on the Microstructure Evolution and Mechanical Property in an Al-Cu-Li Alloy Sheet

Effect of aging on the mechanical properties and corrosion susceptibility of an Al-Cu-Li-Zr alloy containing Sc

Effect of Aging Process on Microstructures and Mechanical Properties of a New Al-Cu-Li Alloy

Effect of aging condition on corrosion resisitance property of 1441 Al-Li alloy

Effect of aging on corrosion property, electrochemical behavior and microstructure of AlZnMgCu alloy

Effect of aging treatment on microstructure and mechanical properties of a new Al-Li-Cu alloy

Effect of Different Aging Processes on the Corrosion Behavior of New Al–Cu–Li–Zr–Sc Alloys

Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control

Intergranular Corrosion and Exfoliation Corrosion Behaviors of 2197 Al-Li Alloy with Different Aging Treatments

Effect of Aging Treatment on High Temperature Mechanical Properties of a Cast Al–Li–Cu Alloy

Effect of Aging Time on the Microstructural Characterization and Corrosion Resistance of Al-4.5Cu-1Li-0.4Mg-0.4Ag-0.4Mn-0.5Zn Alloys

Effect of Aging Time on Precipitation Behavior, Mechanical and Corrosion Properties of a Novel Al-Zn-Mg-Sc-Zr Alloy

Effect of Aging Treatment on Microstructure and Corrosion Properties of Al-Cu-Mn-Si-Mg-Er-Zr Alloy

Effect of aging treatment on microstructures, tensile properties and intergranular corrosion behavior of Al–Cu–Li alloy

Microstructure Evolution and the Resulted Influence on Localized Corrosion in Al-Zn-Mg-Cu Alloy during Non-Isothermal Ageing

Effects of aging treatment on microstructure and properties of 2A97 aluminum-lithium alloy