Abstract:In this study, we investigated the effects of modified aging treatments on the microstructures and hardness in a commercial 6016 Al alloy through hardness tests and transmission electron microscopy (TEM) observations. The results demonstrate that many fine needle-like β′′ phases contribute to the high hardness of peak-aged (T6) alloys. Over-aging treatments lead to the precipitation of lath-like β′, β′′/disordered, or B′/disordered composite phases. Moderate over-aging treatment results in the coarsening of grain boundary precipitates (GBPs) and widening of the precipitate-free zone (PFZ), while heavy over-aging treatment triggers the re-precipitation of Cu-containing GBPs and increases the number density of GBPs. A retrogression and re-aging (RRA) treatment precipitates β′′, lath-like β′, and disordered phases, while a two-step aging (T78) treatment precipitates β′′, B′, and disordered phases. Both the T78 and the RRA treatments lead to the coarsening of GBPs and the widening of PFZs. The decreased hardness during over-aging treatments is attributed to a combination of coarsening intragranular precipitates and/or wider PFZs. The T78 and RRA tempers achieve 95.5% and 94% of the hardness values of the T6 treatment, respectively. The hardness values of the RRA and T78 treated alloys are related to the finer nano-sized precipitates formed during the high temperature process. These precipitates can compensate for the loss of hardness caused by the increase in the widths of the PFZs and the coarsening of the matrix precipitates. The relationship between the hardness and microstructures such as PFZs and precipitates in the matrix during various heat treatments is elucidated.

Effect of aging treatment on microstructures, tensile properties and intergranular corrosion behavior of Al–Cu–Li alloy

The Effect of Al on Microstructure and Properties of Cu-15Ni-8Sn During the Aging

Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control

Effect of Aging Time on the Microstructural Characterization and Corrosion Resistance of Al-4.5Cu-1Li-0.4Mg-0.4Ag-0.4Mn-0.5Zn Alloys

Effect of aging treatment on microstructure and properties of lead-free free-cutting Al-Cu alloy

Effect of ageing treatment process on the microstructure development and mechanical properties of 6082 Al alloy

Effect of Aging Treatment on High Temperature Mechanical Properties of a Cast Al–Li–Cu Alloy

Effects of Aging Treatment on Corrosion Behavior of a Tensile Deformed Al-Cu-Mn-Fe-Zr Alloy in 3.5% NaCl Solution

Effects of Aging Treatments on the Age Hardening Behavior and Microstructures in an Al-Mg-Si-Cu Alloy

Effect of aging temperature on microstructure and corrosion behavior of 6082 aluminum alloy

Effect of aging on the mechanical properties and corrosion susceptibility of an Al-Cu-Li-Zr alloy containing Sc

Influence of Aging Treatment on the Microstructure, Mechanical Properties and Corrosion Behavior of Al-Zn-Mg-Sc-Zr Alloy

Effect of aging treatment on microstructure and mechanical properties of Cu–Ag alloys

Effect of aging treatment on microstructure, mechanical and corrosion properties of 7055 aluminum alloy prepared using powder by-product

Effect of Different Ageing Processes on Microstructure and Mechanical Properties of Cast Al–3Li–2Cu–0.2Zr Alloy

Microstructure and Properties of T6I4 Aged 700-MPa-Grade Aluminum Alloy

Effect of Non-Isothermal Aging on the Microstructure and Properties of Al-Zn-Mg-Cu Alloys

Influence of aging on microstructure, mechanical properties and stress corrosion cracking of 7136 aluminum alloy

Effects of under-aging treatment on microstructure and mechanical properties of squeeze-cast Al-Zn-Mg-Cu alloy

Study on the microstructure and age hardening capability in Al–Cu–Li alloys with different Cu/Li ratio

Influence of aging treatments on the strength and localized corrosion resistance of aged Al–Zn–Mg–Cu alloy