Abstract:WPU/inorganic composite material has been taken as a kind of promising materials,since it has both advantages of organic and inorganic materials.However,the structural difference between organic and inorganic materials resulted in bad compatibility.The bad compatibility not only restricted the function of inorganic particles in polymer,but also caused the inhomogeneous structure as well as inferior properties of composite materials.Thus,good dispersity of inorganic particles in polyurethane was the key factor for obtaining WPU/inorganic composite with excellent properties.The WPU/SiO2 composite emulsion was prepared by sol-gel process,which consisted of an aqueous silica sol with highly branched structure (KS560) and (3-aminopropyl) triethoxylsilane (APTES)-terminated waterborne polyurethane (WPU).The degree of neutralization (DN) of composite emulsion was controlled by the mole ratio of Triethylamine (TEA)/2,2-Dimethylolpropionic acid (DMPA),and the effect of DNvalue on structure and properties of WPU/SiO2 composite was investigated.The chemical crosslinking between WPU and KS560 was confirmed by 29Si NMR and rheological test.In rheological test,the storage modulus of composite emulsion reduced with increasing the DN value,since it increased the crosslinking efficiency of WPU and KS560.SEM images found that the addition of KS560 could transfer the stress and prevent cracks in film formation.The smooth of composite film also improved with increasing DNvalue.Moreover,the polysiloxane network was introduced into WPU by KS560,which would improve the thermal stability,water resistance and mechanical properties of the WPU/SiO2 composite.When the DN value was 80％,the minimum water absorption of composite was reached to 4％.In addition,an increase in DN value could promote the interaction between WPU and KS560,KS560 and KS560,thus the tensile stress and modulus of WPU/SiO2 composite were improved.

The Research on UF Resin Glue Modified with the Wollastonite Powder

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Study on structure and properties of glyoxal-urea-formaldehyde copolycondensation resin

Ureido Hyperbranched Polymer Modified Urea-Formaldehyde Resin as High-Performance Particleboard Adhesive

Study on Mechanical Properties of PP/Wollastonite Composites

Preparation and characterization of a novel environment-friendly urea-glyoxal resin of improved bonding performance

[Study on the Structure and Nanomechanical Properties of Organic Montmorillonite Reinforced Urea-Formaldehyde Adhesive]

Preparation of EVA modified urea-formaldehyde resin/stone powder composite materials

Effects of the Wollastonite Fiber Modification on the Sliding Wear Behavior of the UHMWPE Composites

Research and Modification of Waterborne Polyurethane Adhesives

Synthesis of Low-toxicity UF Resin

EFFECT OF SURFACE MODIFCATON METHOD ON MECHANCAL PROPERTES OF PA6/WOLLASTONTE COMPOSTE

Preparation and characterization of carboxylate/sulfonate composite WPU emulsion adhesive

Modification of Urea-Formaldehyde Resin Adhesive with Silicone Emulsion

The preparation and properties of inorganic wheat-straw particleboard

Calcium carbonate modified urea–formaldehyde resin adhesive for strength enhanced medium density fiberboard production

Study on PF Resin Modified with MUF Resin

Investigation on Low Toxic UF Resin Modified with a New Type of Silicone

Effect of Modification Methods of Wheat Straw Fibers on Water Absorbency and Mechanical Properties of Wheat Straw Fiber Cement-Based Composites

Study on Surface Modification of Wollastonite

Effect of the Degree of Neutralization on the Crosslinking of the Aqueous Silica Sol/WPU Composite Polymer