Abstract:Deployable trusses that are widely applied in space missions utilize many hinged members to adapt to different geometrical shapes and work conditions. This paper presents two improved finite elements for a link and a bending beam to calculate dynamic characteristics of non-jointed and jointed trusses. First, the axial and transverse wave motion equations of a beam are used to get the shape functions of the link and the beading beam in their axial and transverse directions. Second, the dynamic matrices of stiffness and mass for a link and a bending beam are established on the basis of virtual work principle. The dynamic matrix and a theoretical equation are used to calculate the natural frequency of a cantilever bar. The comparison of the two results shows the effectiveness of the dynamic stiffness matrix. These improved elements are proved to be more accurate in calculating the responses of structures at high frequencies than common elements. Equivalent models of non-jointed and jointed structures are obtained on the basis of the displacement and strain energy equivalence of a truss unit. The result of the period truss confirms the accuracy of the equivalent model of the non-jointed truss expressed by dynamic matrices. The dynamic influences of cubic joints on a jointed structure are evaluated by giving the simulations of the equivalent jointed structure based on improved matrices. The results indicate that the natural frequencies of the jointed structure increase with the excitation force and the stiffness of joints. A relational function among the natural frequencies, joint stiffness, and excitation force is also presented.

Modal Analysis of Frames with Reverberation Ray Matrix Method

Modal Analysis of Through Steel Truss Girder Bridge

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Dynamic Analysis of Space Frames: the Method of Reverberation-Ray Matrix and the Orthogonality of Normal Modes

Free Vibration of Timoshenko Beams on Elastic Foundation with Horizontal Frictions

Model Analysis of Steel Frame Structures Considering Interactions between Racks and the Frame

Elastodynamic Theory of Framed Structures and Reverberation-Ray Matrix Analysis

Reverberation-Ray Analysis of Continuous Timoshenko Beams Subject to Moving Loads

An Analytical Method and Its Extension for Linear Modal Analysis of Beam-Type Systems Carrying Various Substructures

Reverberation ray matrix analysis for wave propagation in beam structures with rigid components

Extension and Application of Reverberation-Ray Matrix Method to Dynamic Responses of Structures

Dynamics of a Prestressed Timoshenko Beam Subject to Arbitrary External Load

ANALYSIS OF EARTHQUAKE EFFECT FOR FRAMES BY THE METHOD OF REVERBERATION RAY MATRIX

Application of the Method of Reverberation Ray Matrix to the Early Short Time Transient Responses of Stiffened Laminated Composite Plates

Damping identification using weighted fitting of Frequency-response-function (WFF) method

Modal Analysis of Frame Structure Teaching Building

Transient Wave Propagation in Structures with MTMD

Transient Wave Propagation in the Ring Stiffened Laminated Composite Cylindrical Shells Using the Method of Reverberation Ray Matrix.

Equivalence and Dynamic Analysis for Jointed Trusses Based on Improved Finite Elements

Reverberation-ray analysis of moving or distributive loads on a non-uniform elastic bar

Dynamic Optimization of Timoshenko Beam with Internal Elastic Support under Axial Force