A CMOS Compatible Microring-Based On-Chip Isolator with 18db Optical Isolation

Li Fan,Jian Wang,Hao Shen,Leo T. Varghese,Ben Niu,Jing Ouyang,Minghao Qi

DOI: https://doi.org/10.1364/fio.2010.fthq4

2010-01-01

Abstract:We demonstrate strong optical nonreciprocity in microring add-drop filters with asymmetric input and output coupling coefficients. Up to 18dB isolation was achieved with a silicon-on-insulator high-Q microring of 5 micrometer radius.

What problem does this paper attempt to address?

Channel-Selectable Optical Link Based on a Silicon Microring for On-Chip Interconnection

Qiu Chen,Hu Ting,Wang Wan-Jun,Yu Ping,Jiang Xiao-Qing,Yang Jian-Yi

DOI: https://doi.org/10.1088/0256-307x/29/9/094204

2012-01-01

Chinese Physics Letters

Abstract:A channel-selectable optical link based on a silicon microring resonator is proposed and demonstrated.This optical link consists of the wavelength-tunable microring modulators and the filters,defined on a silicon-on-insulator (SOI) platform.With a p-i-n junction embedded in the microring modulator,light at the resonant wavelength of the ring resonator is modulated.The 2nd-order microring add-drop filter routes the modulated light.The channel selectivity is demonstrated by heating the microrings.With a thermal tuning efficiency of 5.9mW/nm,the filter drop port response was successfully tuned with 0.8nm channel spacing.We also show that modulation can be achieved in these channels.This device aims to offer flexibility and increase the bandwidth usage efficiency in optical interconnection.
Optical Isolation Based on Nonreciprocal Micro-Ring Resonator

Haibin Zhu,Chun Jiang

DOI: https://doi.org/10.1109/jlt.2011.2144564

IF: 4.7

2011-01-01

Journal of Lightwave Technology

Abstract:We propose a nonreciprocal waveguide with different wavevectors for forward and backward propagations. Utilizing this nonreciprocal waveguide, we further compose a nonreciprocal micro-ring resonator, which possesses different phase shifts for clockwise and anticlockwise circulatings. Using this nonreciprocal resonator, more than 20 dB optical isolation can be achieved. This work demonstrates that on-chip optical isolations can be accomplished with simple nonreciprocal resonator components, which can show promising applications for integrated optoelectronic systems.
CMOS - Compatible reconfigurable microring demultiplexer with doped silicon slab heater

Kang Xiong,Xi Xiao,Xianyao Li,Yingtao Hu,Zhiyong Li,Tao Chu,Yude Yu,Jinzhong Yu

DOI: https://doi.org/10.1016/j.optcom.2012.06.085

IF: 2.4

2012-01-01

Optics Communications

Abstract:We present a 1×4 reconfigurable demultiplexer based on cascaded silicon microring resonators. The device is fabricated on a 0.18μm complementary metal oxide semiconductor (CMOS) process. A homogeneous doped silicon slab heater is proposed and fabricated directly on the slab region of the microring resonator for thermal tuning. The flows of the heating currents in the heaters are parallel to the ring waveguide through the heavily doped slab regions located on both sides of the ring waveguide without through the waveguide core regions. The proposed doped heaters are experimentally verified with low-voltage operation and tuning efficiency of ∼77pm/mW. Without any tuning or trimming, predicted average channel spacing distribution in the whole free spectral range (FSR) is demonstrated. Full reconfigurability is also demonstrated in the demultiplexer with channel spacing of 2nm (250GHz) and 1nm (125GHz), corresponding to channel isolation of less than −21dB and −16dB, respectively. Such a low-voltage operation and reconfigurable demultiplexer is suitable for on-chip optical interconnect.
Dual-band Optical Filter Based on a Single Microring Resonator Embedded with Nanoholes

Zecen Zhang,Geok Ing Ng,Haodong Qiu,Xin Guo,Mohamed Said Rouifed,Chongyang Liu,Hong Wang

DOI: https://doi.org/10.1109/cleopr.2017.8119016

2017-01-01

Abstract:A dual-band optical filter based on a single microring resonator embedded with nanoholes is theoretically and experimentally demonstrated for the first time. A numerical model based on transfer matrix method is utilized to simulate the performance of this device. The coupling between the microring resonator and the Fabry-Pérot resonator formed by nanoholes gives rise to the dual-band optical filtering spectrum. In our experiment, a single microring resonator embedded with nanoholes was fabricated on a commercial 220-nm-thick-top-silicon silicon-on-insulator (SOI) platform. Good performance was achieved with measured extinction ratio of 9 dB, insertion loss of lower than 1 dB, and quality factor of 11900. Both experimental and simulation results are in good agreement.
Compact microring resonators integrated with grating couplers working at 2 μm wavelength on silicon-on-insulator platform.

Zecen Zhang,Geok Ing Ng,Haodong Qiu,Wanjun Wang,Xin Guo,Mohamed S Rouifed,Chongyang Liu,Hong Wang

DOI: https://doi.org/10.1364/AO.56.005444

IF: 1.9

2017-01-01

Applied Optics

Abstract:Compact all-pass and add-drop microring resonators (radius=10 μm) integrated with grating couplers working at 2 μm wavelength are designed, fabricated, and characterized on a commercial 340-nm-thick-top-silicon silicon-on-insulator platform. They are suitable for high-volume integrated optical circuits at 2 μm wavelength as the fabrication process involved are uncomplicated and complementary metal-oxide-semiconductor (CMOS)-process compatible, thus making them more convenient to be utilized. The performance of the grating couplers, based on four most important parameters, has been simulated and optimized. The simulation and experimental results of grating couplers show the lowest coupling loss of 4.5 dB and 6.5 Db, respectively. By utilizing the grating couplers to couple light in and out from the chip, the designed microring resonators have been tested. The experimental results of microring resonators show that an extinction ratio of 12 dB and a quality factor of 11,200 can be achieved. To the best of our knowledge, this is thus far the smallest microring resonator ever demonstrated at this wavelength.
Monolithic On-chip Magneto-optical Isolator with 3 Db Insertion Loss and 40 Db Isolation Ratio

Qingyang Du,Chuangtang Wang,Yifei Zhang,Yan Zhang,Takian Fakhrul,Wei Zhang,Claudia Goncalves,Cesar Blanco,Kathleen Richardson,Longjiang Deng,Caroline A. Ross,Lei Bi,Juejun Hu

DOI: https://doi.org/10.1021/acsphotonics.8b01257

IF: 7

2018-01-01

ACS Photonics

Abstract:On-chip optical isolators constitute an essential building block for photonic integrated circuits (PICs). Here, we experimentally demonstrated a magneto-optical isolator monolithically integrated on silicon featuring 3 dB insertion loss and 40 dB isolation ratio, both of which represent significant improvements over state-of-the-art. The isolator is also fully passive and operates under a simple unidirectional magnetization scheme. Such superior performance is enabled through a three-way combination of a strip-loaded waveguide design, a compositionally optimized chalcogenide glass as the light guiding medium, and low-loss taper structures created via gray-scale lithographic processing. The device represents an important step toward a practical solution for on-chip isolation in PICs.
On-Chip Optical Isolation in Monolithically Integrated Non-Reciprocal Optical Resonators

Lei Bi,Juejun Hu,Peng Jiang,Dong Hun Kim,Gerald F. Dionne,Lionel C. Kimerling,C. A. Ross

DOI: https://doi.org/10.1038/nphoton.2011.270

IF: 35

2011-01-01

Nature Photonics

Abstract:Non-reciprocal photonic devices, including optical isolators and circulators, are indispensible components in optical communication systems. However, the integration of such devices on semiconductor platforms has been challenging because of material incompatibilities between semiconductors and magneto-optical materials that necessitate wafer bonding, and because of the large footprint of isolator designs. Here, we report the first monolithically integrated magneto-optical isolator on silicon. Using a non-reciprocal optical resonator on an silicon-on-insulator substrate, we demonstrate unidirectional optical transmission with an isolation ratio up to 19.5 dB near the 1,550 nm telecommunication wavelength in a homogeneous external magnetic field. Our device has a small footprint that is 290 µm in length, significantly smaller than a conventional integrated optical isolator on a single crystal garnet substrate. This monolithically integrated non-reciprocal optical resonator may serve as a fundamental building block in a variety of ultracompact silicon photonic devices including optical isolators and circulators, enabling future low-cost, large-scale integration.
On-chip Integrated Magneto-Optical Nonreciprocal Photonic Devices

LIU Shuyuan,DENG Longjiang,BI Lei

DOI: https://doi.org/10.1364/iprsn.2021.im1b.4

2020-01-01

Abstract:High performance planar optical isolators and circulators with isolation ratio of 30 dB and record low insertion loss of 0.5 dB have been developed on SiN photonic integrated circuits.
Ultra High Optical Nonreciprocity Using Silicon Microring Resonators

Li Fan,Leo T. Varghese,Jian Wang,Yi Xuan,Andrew M. Weiner,Minghao Qi

DOI: https://doi.org/10.1109/phosst.2013.6614453

2013-01-01

Abstract:An ultra high nonreciprocal transmission ratio of 40 dB is achieved using an all-silicon optical diode. By experimentally studying the power dynamics of individual microring resonators, we investigate the device mechanism and offer improvements.
Ultra-High Dynamic Extinction Ratio Electro-Optical Modulator with Coupled Microring on SOI Platform

Zhuo Cheng,Bigeng Chen,Chunlei Sun,Maoliang Wei,Shaoliang Yu,Lan Li,Hongtao Lin,Yunjiang Rao

DOI: https://doi.org/10.1109/acp55869.2022.10089079

2022-01-01

Abstract:A 5 th -order coupled microring electro-optical modulator with PIN structures is proposed and experimentally demonstrated on SOI integrated photonics platform. Ultra-high dynamic extinction ratio (ER) up to 60 dB is achieved benefiting from the high-order optical band-pass filter design. The device size on chip is only 400×220 μm 2 including electrodes and the driving voltage is 2.1 V corresponding to 0.23 W power consumption. Such integrated modulators would be promising in building compact and low-power distributed optical fiber sensing systems using low-background-noise optical pulses.
Wavelength-Selective Optical Waveguide Isolator Based on Nonreciprocal Ring-Coupled Mach–Zehnder Interferometer

Haifeng Zhou,Xiaoqing Jiang,Jianyi Yang,Qiang Zhou,Tianbao Yu,Minghua Wang

DOI: https://doi.org/10.1109/jlt.2008.926946

IF: 4.7

2008-01-01

Journal of Lightwave Technology

Abstract:By implanting nonreciprocal phase shifts (NPS) into a ring-coupled Mach-Zehnder interferometer (RCMZI) structure, wavelength-selective isolation can be obtained over a wideband range. Different transmission lineshapes and structures of the nonreciprocal RCMZI were examined to meet the requirements of multiwavelength usage. It was demonstrated that a multiwavelength isolation with wideband and high-peak isolation could be achieved with just a reciprocal ring-coupled arm and a nonreciprocal linear arm in a MZI structure. For 5% ring loss per loop, the ring power coupling ratio kappa has a tolerance of 0.06 to keep the 30-dB isolation band wider than 0.3 × FSR. Also, an isolator over C-band was designed to verify the feasibility and discuss the wavelength-dependence issues.
An Optical Diode Based on Nonlinear Second-Order Silicon Microring Resonator

Yun Long,Jian Wang,Chengcheng Gui,Shuhui Li,Jing Du

DOI: https://doi.org/10.1109/ipcon.2013.6656360

2013-01-01

Abstract:We present an ultra-compact optical diode using nonlinear second-order silicon microring resonator which is complementary metal-oxide semiconductor (CMOS) compatible. The designed optical diode features high isolation (>20 dB) and more tolerant resonance wavelength mismatch (+/-0.35 nm with <;1.5 dB isolation degradation).
Integrated Reconfigurable Microring Based Silicon Wdm Receiver for On-Chip Optical Interconnect

Ao Shen,Chen Qiu,Long-Zhi Yang,Ting-Ge Dai,Yin-Lei Hao,Xiao-Qing Jiang,Jian-Yi Yang

DOI: https://doi.org/10.1088/2040-8978/17/5/055801

IF: 2.1

2015-01-01

Journal of Optics

Abstract:We demonstrate an integrated reconfigurable wavelength division multiplexing receiver on the silicon-on-insulator (SOI) platform. The receiver is composed of a 1 x 8 thermally tunable microring resonator filter and Ge-Si photodetectors. With low thermal tuning powers the channel allocation of the receiver can be reconfigured with high accuracy and flexibility. The thermal tuning efficiency is approximately 8 mW nm(-1). We show eight-channel configurations with channel spacing of 100 GHz and 50 GHz and a configuration in which all eight channels cover an entire free spectral range of the ring with uniform channel spacing of 1.2 nm. Each channel can receive high-quality signals with a data rate of up to 13.5 Gb s(-1); thus an aggregate data rate higher than 100 Gb s(-1) can be achieved.
Optical Ring-Resonator Modulator Based on 0.8 Μm CMOS Technology

Wang Fan,Qiu Chen,Xiao Si-Miao,Hao Yin-Lei,Jiang Xiao-Qing,Wang Ming-Hua,Yang Jian-Yi

DOI: https://doi.org/10.1088/0256-307x/26/10/104206

2009-01-01

Chinese Physics Letters

Abstract:Optical ring-resonator-based modulators are fabricated on the silicon-on-insulator material through the mature commercial 0.8 mu m complementary metal oxide semiconductor foundry. The device configuration is based on a single ring resonator coupled to one bus waveguide. The waveguide widths are about 1 mu m. The p-i-n junctions are employed to inject currents. The experimental result shows that the ring resonators with the quality factor of above 40000 are obtained. The maximum extinction ratio of the modulators is larger than 10dB. The speed is tens of nanoseconds, and the corresponding injected current is smaller than 10 mA.
A 210-Ghz Magnetless Nonreciprocal Isolator in 130-Nm SiGe BiCMOS Based on Resistor-Free Unidirectional Ring Resonators

Yunfan Wang,Wenhua Chen,Xingcun Li

DOI: https://doi.org/10.1109/lmwc.2020.2985865

IF: 3

2020-01-01

IEEE Microwave and Wireless Components Letters

Abstract:Nonreciprocal components such as circulators, isolators, and gyrators play vital roles in modern communication systems. However, all of them are limited to 0.1 terahertz (THz) due to their poor performances in terms of linearity, loss, and noise at high frequency, making them not amenable for the potential sub-THz/THz operation. In this letter, a 210-GHz nonreciprocal isolator based on the resistor-free unidirectional ring resonators is implemented in a 130-nm SiGe BiCMOS process ( $f_{T}/f_{\mathrm {max}} = 300$ /500 GHz). Thanks to the proposed resistor-free ring resonators, the isolator achieves 1.40-dB loss, 6.7-dB noise figure (NF)/unit, 21.2-dB isolation, and superior linearity. Even compared with the nonreciprocal components operating at a much lower frequency, this structure also exhibits a good performance.
Electro-optical silicon isolator

Hugo Lira,Zongfu Yu,Shanhui Fan,Michal Lipson

DOI: https://doi.org/10.48550/arXiv.1110.5337

2011-10-25

Abstract:We create a non-magnetic CMOS-compatible optical isolator on a silicon chip. The isolator is based on indirect interband photonic transition, induced by electrically-driven dynamic refractive index modulation. We demonstrate an electrically-induced non-reciprocity: the transmission coefficients between two single-mode waveguides become dependent on the propagation directions only in the presence of the electrical drive. The contrast ratio between forward and backward directions exceeds 30dB in simulations. We experimentally observe a strong contrast (up to 3 dB) limited only by our electrical setup, for a continuous-wave (CW) optical signal. Importantly, the device is linear with respect to signal light. The observed contrast ratio is independent of the timing, the format, the amplitude and the phase of the input signal.

Optics
25 Gbit/s silicon microring modulator based on misalignment-tolerant interleaved PN junctions.

Xi Xiao,Hao Xu,Xianyao Li,Yingtao Hu,Kang Xiong,Zhiyong Li,Tao Chu,Yude Yu,Jinzhong Yu

DOI: https://doi.org/10.1364/OE.20.002507

IF: 3.8

2012-01-01

Optics Express

Abstract:A high-speed depletion-mode silicon-based microring modulator with interleaved PN junctions optimized for high modulation efficiency and large alignment tolerance is demonstrated. It is fabricated using standard 0.18 μm complementary metal-oxide-semiconductor processes and provides low V(π)L(π)s of 0.68 V·cm to 1.64 V·cm with a moderate doping concentration of 2 × 10(17) cm(-3). The measured modulation efficiency decreases by only 12.4% under ± 150 nm alignment errors. 25 Gbit/s non-return-zero modulation with a 4.5 dB extinction ratio is experimentally realized at a peak-to-peak driving voltage of 2 V, demonstrating the excellent performance of the novel doping profile.
A CMOS Compatible 1&#x00d7;3 Optical Switch Based on Silicon on Insulator

Wanjun Wang,Yong Zhao,Yubo Li,Yinlei Hao,Jianyi Yang,Minghua Wang,Xiaoqing Jiang

DOI: https://doi.org/10.1109/group4.2010.5643379

2010-01-01

Abstract:A 1×3 optical switch is demonstrated utilizing the 0.8-μm standard CMOS technology. Extinction ratios higher than 21dB are obtained for three states. It is with low power consumption (~7.4mW) and switching time (~15.3ns).
On-chip Microwave Signal Generation Based on a Silicon Microring Modulator.

Haifeng Shao,Hui Yu,Xia Li,Yan Li,Jianfei Jiang,Huan Wei,Gencheng Wang,Tingge Dai,Qimei Chen,Jianyi Yang,Xiaoqing Jiang

DOI: https://doi.org/10.1364/ol.40.003360

IF: 3.6

2015-01-01

Optics Letters

Abstract:A photonic-assisted microwave signal generator based on a silicon microring modulator is demonstrated. The microring cavity incorporates an embedded PN junction that enables a microwave signal to modulate the lightwave circling inside. The DC component of the modulated light is trapped in the cavity, while the high-order sideband components are able to exit the cavity and then generate microwave signals at new frequencies in a photodetector. In our proof-of-concept experiment, a 10 GHz microwave signal is converted to a 20 GHz signal in the optical domain with an electrical harmonic suppression ratio of 22 dB. An analytic model is also established to explain the operation mechanism, which agrees well with the measured data. (C) 2015 Optical Society of America
On-Chip Optical Nonreciprocity Using An Active Microcavity

Xiaoshun Jiang,Chao Yang,Hongya Wu,Shiyue Hua,Long Chang,Yang Ding,Qian Hua,Min Xiao

DOI: https://doi.org/10.1038/srep38972

IF: 4.6

2016-01-01

Scientific Reports

Abstract:Optically nonreciprocal devices provide critical functionalities such as light isolation and circulation in integrated photonic circuits for optical communications and information processing, but have been difficult to achieve. By exploring gain-saturation nonlinearity, we demonstrate on-chip optical nonreciprocity with excellent isolation performance within telecommunication wavelengths using only one toroid microcavity. Compatible with current complementary metal-oxide-semiconductor process, our compact and simple scheme works for a very wide range of input power levels from similar to 10 microwatts down to similar to 10 nanowatts, and exhibits remarkable properties of one-way light transport with sufficiently low insertion loss. These superior features make our device become a promising critical building block indispensable for future integrated nanophotonic networks.

A CMOS Compatible Microring-Based On-Chip Isolator with 18db Optical Isolation

Channel-Selectable Optical Link Based on a Silicon Microring for On-Chip Interconnection

Optical Isolation Based on Nonreciprocal Micro-Ring Resonator

CMOS - Compatible reconfigurable microring demultiplexer with doped silicon slab heater

Dual-band Optical Filter Based on a Single Microring Resonator Embedded with Nanoholes

Compact microring resonators integrated with grating couplers working at 2 μm wavelength on silicon-on-insulator platform.

Monolithic On-chip Magneto-optical Isolator with 3 Db Insertion Loss and 40 Db Isolation Ratio

On-Chip Optical Isolation in Monolithically Integrated Non-Reciprocal Optical Resonators

On-chip Integrated Magneto-Optical Nonreciprocal Photonic Devices

Ultra High Optical Nonreciprocity Using Silicon Microring Resonators

Ultra-High Dynamic Extinction Ratio Electro-Optical Modulator with Coupled Microring on SOI Platform

Wavelength-Selective Optical Waveguide Isolator Based on Nonreciprocal Ring-Coupled Mach–Zehnder Interferometer

An Optical Diode Based on Nonlinear Second-Order Silicon Microring Resonator

Integrated Reconfigurable Microring Based Silicon Wdm Receiver for On-Chip Optical Interconnect

Optical Ring-Resonator Modulator Based on 0.8 Μm CMOS Technology

A 210-Ghz Magnetless Nonreciprocal Isolator in 130-Nm SiGe BiCMOS Based on Resistor-Free Unidirectional Ring Resonators

Electro-optical silicon isolator

25 Gbit/s silicon microring modulator based on misalignment-tolerant interleaved PN junctions.

A CMOS Compatible 1&amp;#x00d7;3 Optical Switch Based on Silicon on Insulator

On-chip Microwave Signal Generation Based on a Silicon Microring Modulator.

On-Chip Optical Nonreciprocity Using An Active Microcavity

A CMOS Compatible 1×3 Optical Switch Based on Silicon on Insulator