Abstract:Computer-Aided Design (CAD) tools are extensively used throughout all of the steps in a VLSI design flow. The physical design domain is one of the three domains that are conceptually abstracted in representing a VLSI design flow. This research work focuses on three areas in VLSI physical design domain: clock tree design and buffer insertion, interconnect model order reduction and LVS verification. First, an optimal buffer insertion for clock delay and skew minimization algorithm is developed based on the theory that the minimal clock delay can be obtained by equalizing derivatives of a convex function, and the minimal clock skew can be achieved by equalizing delay functions of different source-to-sink paths. Experimental results show that the presented algorithm achieves both minimal delay and skew in real clock tree design. Further, an automatic clock tree design algorithm is developed for realizing the pre-specified clock arrival time requirements that often occur in an IP block based design environment. In this proposed strategy, planar clock routing and buffer insertion are carried out simultaneously to minimize clock delay and skew, and a full waveform simulation is applied to ensure the signal integrity necessary for high-speed VLSI design. Second, an efficient balanced truncation realization algorithm is presented for interconnect model order reduction. This algorithm shows that there is no need to solve the whole Lyapunov equation for controllability and observability grammians before obtaining approximation to their predominant spaces, and a linear order reduction algorithm can be achieved by extending the O(n) Krylov Subspace Oblique Projection method. Finally, a unique LVS methodology is proposed for the verification of a quad-core microprocessor designed with a triple-well 90-nm CMOS technology. Due to the IP reuse, the standard LVS flow is incapable of handling the additional design complexity in verifying the LVS for the chip designed with multiple power domains. This proposed LVS strategy consists of two phases. The first phase involves verifying LVS at the block level as well as the full-chip level. The second phase aims at verifying the integrity of the multi-power-domain power grid. The proposed LVS methodology was successfully verified by real silicon.

An Efficient Low-Degree RMST Algorithm for VLSI/ULSI Physical Design

Spanning graph-based nonrectilinear steiner tree algorithms

The Polygonal Contraction Heuristic for Rectilinear Steiner Tree Construction

Algorithms and Methodology in Physical Domain Optimization for High-Performance Vlsi Design

RSMT-MR: A Novel RSMT Algorithm

Mixed Integer Programming based Placement Refinement by RSMT Model with Movable Pins

Linear Decomposition Algorithm for VLSI Design Applications

Exact Algorithms for the Minimum Load Spanning Tree Problem

A Practical and Efficient Integrated System for VLSI/ULSI Physical Design

Via minimization algorithm for double-layer in VLSI and PCB.

Balance of memory footprint and runtime for high-density routing in large-scale FPGAs

An O ( N Log N ) Algorithm for Obstacle-Avoiding Routing Tree Construction in the Λ-Geometry Plane

LRSDP: Low-Rank SDP for Triple Patterning Lithography Layout Decomposition

A new representation in 3D VLSI floorplan: 3D O-Tree

On Approximating Degree-Bounded Network Design Problems

High Efficient Automatic Power/Ground Layout Routing Algorithm for Analog ICS

A Simultaneous Placement And Global Routing Algorithm Based On Bsg Structure

G-Tree: Gravitation-direction-based Rectilinear Steiner Minimal Tree Construction Considering Bend Reduction

Obstacle-Avoiding Rectilinear Minimum-Delay Steiner Tree Construction Towards Ip-Block-Based Soc Design

Ultralow-Latency VLSI Architecture Based on a Linear Approximation Method for Computing Nth Roots of Floating-Point Numbers