Abstract:Fused deposition modelling (FDM) is a well-known additive manufacturing technique, which can transfer digital three-dimensional (3D) models into functional components directly. Despite many advantages FDM can offer, poor surface accuracy of fabricated objects has always been a big issue that attracts increasing attention. To study the influence on the surface profiles imposed by various process parameters effectively as well as quantitatively, the mathematical model of the surface profile need to be developed. In this work, a new surface profile model is developed to characterize the surface profile of FDM fabricated parts. The process parameters are classified into two groups (i.e. pre-process parameters and fabrication process parameters) to investigate the impacts on surface characterization. Corresponding experiments are conducted using an FDM machine to make comparison with the predicted values and to validate the reliability and effectiveness of the proposed surface models. Both the experimental results and theoretical values indicate that the surface accuracy of the top surface is mainly determined by the ratio between molten paste flowrate and the nozzle feedrate under specified layer thickness and path spacing. On the other hand, the surface quality of the side surface is primarily affected by the layer thickness and the stratification angle of the surface. At the same time, some optimization approaches for the surface improvement are presented: appropriate ratio between paste flowrate and fabrication speed are required for desirable top surface and thinner layer thickness can, to some extent, alleviate the staircase effect out of the slicing procedure and the stratification angle of the side surface should be confined to a range to avoid large geometric errors.

Influence of Process Parameters on Surface Roughness in Rapid Manufacturing for Expandable Polystyrene Pattern

A Novel Rapid Prototyping System for Expandable Polystyrene

A Novel Three Dimension Rapidly Manufacturing of Expandable Polystyrene

Surface Characteristics of Machined Polystyrene with 3D Printed Thermoplastic Tool

Study of Variable Direction Zone-Scanning Path with EPS Rapid Prototyping System

Study on the Surface Quality of High Temperature Prototype to Rapid Processing Based on Parameter Optimization

Quantitative Analysis of Surface Profile in Fused Deposition Modelling

Sandwich panel design and performance optimization based on triply periodic minimal surfaces

EPS Rapid-prototyping System for LFC Pattern Manufacturing

Optimization of Control Parameters in Micro Hot Embossing

Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites

Experimental study on parameters optimization of selective laser melting 316L stainless steel based on response surface methodology

Optimization of process parameters for micro-plasma arc welding-based rapid prototyping

Enhancing the Cooling Efficiency of Aluminum-Filled Epoxy Resin Rapid Tool by Changing Inner Surface Roughness of Cooling Channels

Process Optimization of Robotic Polishing for Mold Steel Based on Response Surface Method

Optimization for solid polymer microstructure replication using gas-assisted hot embossing under low pressure

Laser-assisted surface processing for functionalization of polymers on micro- and nano-scale

Manufacture Of Rapid Metal Mold Based On Rp Prototype By Plasma Spray

EPS Rapid Prototyping System Based on Single Chip Microcomputer Inferior Machine

The accuracy research of a rapid manufacturing process with RP and arc metal spray

Study on the Process Parameters of MPAW-Based Rapid Prototyping