Abstract:This paper investigates the effects of welding voltage, welding current, wire feeding speed, travelling speed and welding position on aspect ratio, dilution rate, microhardness and fluctuation using orthogonal experiment design. To achieve multi-objective optimization, S/N ratio conversion and grey relational analysis were employed, The model-predicted process parameters were then verified. The study findings indicate that the welding position has the greatest impact on aspect ratio, dilution rate and fluctuation, while the welding current has the greatest impact on the microhardness. Additionally, the force of the droplets at different positions affects the average aspect ratio and fluctuation, the arc shape affects the dilution rate, and the heat input affects the microhardness. Furthermore, the arc shape at different positions exhibits distinct characteristics. Finally, the optimal process parameters for different positions were obtained through an orthogonal test. The optimal combination of process parameters was found to be 70 A for welding current, 25 V for welding voltage, 500 cmmin −1 for wire feeding speed, 50 cmmin −1 for travelling speed, and vertical up welding position. The experimental results indicate that the optimized process parameters can consistently improve the welding quality, with a relative error of only 2.38% of only 2.38% between the grey relational degree and predicted value. This study's findings hold significant practical value for enhancing welding process stability and quality.

Optimization of process parameters for micro-plasma arc welding-based rapid prototyping

Study on the Process Parameters of MPAW-Based Rapid Prototyping

Study on the processing parameters of plasma arc welding-based rapid prototyping for Ti-6Al-4V alloy parts

Impact of Process Parameters on Forming Quality and Deposition Efficiency of Unsupported Rods in Wire Arc Additive Manufacturing

Investigation of the Overlapping Parameters of MPAW‐based Rapid Prototyping

Welding rapid prototyping process and microstructure of the prototype parts

Welding Process Carbon Footprint Analysisand Process Parameters Optimization

Multifactor Optimization for Induction Welding of Carbon Fiber Reinforced Thermoplastic Composites Based on Response Surface Methodology

Multi-objective optimization of mechanical quality and stability during micro resistance spot welding

Direct Rapid Manufacturing of Metal Parts Based on 3D Welding

Optimization of Process Parameters for Robotic Fibre Placement

Research on Relationship Between Arc Length and Arc Voltage in the Plasma Deposition Manufacture Process

Study on the Surface Quality of High Temperature Prototype to Rapid Processing Based on Parameter Optimization

Optimization of Process Parameters to Improve the Effective Area of Deposition in GMAW-Based Additive Manufacturing and Its Mechanical and Microstructural Analysis

Process Analysis of Rapid Prototyping with Selective Laser Melting

Study on the automatic control of plasma building-up welding process based on RMP

Development of a welding system for 3D steel rapid prototyping process

Process Optimization of Robust Bonding Between DP590 and AA6061 Using Resistance Riveting Welding

Key Technologies of Data Process for Welding Rapid Prototyping

The Effects of Processing Parameters during the Wire Arc Additive Manufacturing of 308L Stainless Steel on the Formation of a Thin-Walled Structure

Effect of Position of Robotic Gas Metal Arc Welding on Bead Quality and Multi-objective Optimization Through Gray Relational Analysis