Abstract:Continuous reinforced concrete (RC) beams cast in place are commonly used in construction; however, there is a notable gap in the literature regarding the performance of continuous RC beams strengthened with fiber‐reinforced polymer (FRP) sheets. Strengthening RC beams with FRP sheets typically leads to reduced ductility and moment redistribution capacity due to the linear stress–strain behavior of FRP materials compared to non‐strengthened RC beams. Addressing this gap, this study explores the feasibility of enhancing the mechanical properties and ductility of strengthened elements through a hybrid approach, combining carbon‐fiber‐reinforced polymer (CFRP) and glass‐fiber‐reinforced polymer (GFRP) sheets. An experimental program was conducted, retrofitting two continuous two‐span RC beams (250 × 150 × 6000 mm) with hybrid CFRP‐GFRP (HCG) sheets. Concentrated loads were applied at the center of each span, and comprehensive data on strains in FRP sheets, longitudinal reinforcements, and crack propagation patterns were recorded and meticulously analyzed. The outcomes demonstrated that employing HCG sheets for strengthening RC continuous beams significantly improves ductility, load‐carrying capacity, and moment redistribution, surpassing the performance of beams strengthened with either CFRP or GFRP sheets. To ensure accurate predictions of the flexural response, an analytical model was developed and rigorously verified using the experimental results. The model takes into account the strain compatibility condition and provides insights into the behavior of continuous RC beams strengthened with CFRP, GFRP, and HCG sheets. This research contributes valuable knowledge to the understanding of FRP sheet strengthening techniques, emphasizing the efficacy of HCG sheets for achieving enhanced structural performance in continuous RC beams.

Behaviour of concrete beam–column connections reinforced with hybrid FRP sheet

Behavior of Hybrid FRP-Concrete-Steel Tubular Columns: Experimental and Theoretical Studies

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Reinforced concrete beam–column joint strengthened with carbon fiber reinforced polymer

Behavior of Cross Arms Inserted in Concrete-Filled Circular GFRP Tubular Columns

Experimental Study on Seismic Retrofit and Repair of Circular Reinforcement Concrete Short Columns by Fiber Reinforced Plastic

Behaviour of Hybrid Steel and FRP-Reinforced Concrete—ECC Composite Columns under Reversed Cyclic Loading

Behaviour of FRP-strengthened concrete-filled steel tubular composite columns

Experimental study of hybrid FRP reinforced concrete beams

Analysis Of Frp-Strengthened Concrete-Filled Steel Tubular Columns Under Axial Compression

Nonlinear Performance of Concrete Beam Reinforced with Prestressed Hybrid Cfrp/Gfrp Composite Sheet

Seismic performance of reinforced concrete beam–column joint strengthening by frp sheets

Experimental-numerical study on axial compression performance of square concrete columns confined by new-type BFRP

Flexural property and design method evaluation of BFRP and steel bars hybrid reinforced concrete beams

The ways and mechanisms of using CFRP materials to strengthen the flexural performance of reinforced concrete beams

Experimental and numerical study on the shear behavior of hybrid BFRP/steel RC beams without shear reinforcement

Finite Element Modelling of Concrete Cover Separation Failure in FRP Plated RC Beams

Experimental Behavior of FRP-confined Circular RC Columns

Flexural behavior of concrete beams hybrid-reinforced with glass fiber-reinforced polymer, carbon fiber-reinforced polymer, and steel rebars

Hybrid CFRP‐GFRP sheets for flexural strengthening of continuous RC beams: Experimentation and analytical modeling