Abstract:Organic light-emitting diodes (OLEDs) based on conjugated polymers have been attracting much attention because of their cheap and easy fabrication with solution-based processing techniques. Full color displays based on organic materials have very attractive prospects and one of the most exciting ones is the use of ink-jet printing to allow direct patterning of conjugated polymer LED pixels. However, achieving pure-red emission has proved relatively challenging. In this work the optical properties of varying 5,10,15,20-tetra-p-tolyl-21H, 23H-porphine (TTP) doped poly [2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) were studied. The UV-Vis absorption of Q-band of TTP overlapped the photoluminescent spectra of MEH-PPV. This is a priority for occurrence of Frster-type energy transfer. The photoluminescent spectra of varying TTP doped MEH-PPV showed that the emission of TTP increased as the increasing of the doping level at the excitation wavelength of 500 nm, at which TTP didn’t absorb energy, indicating the existence of Frster energy transfer from MEH-PPV to TTP. However, the continuous addition of TTP resulted in the enhanced emission of MEH-PPV at the doping level above 4 percent, due to the self-quenching caused by crystallization of TTP. The devices with varying TTP doped MEH-PPV as light-emitting layers were also fabricated and the structure of the devices was ITO/PEDOT∶PSS/TTP doped MEH-PPV/Al[PEDOT∶PSS=poly(2,3-dihydrothieno[3,4-b]-1,4-dioxin)/ poly(styrenesulfonate)]. The layers of PEDOT/PSS (20 nm) and TTP doped polymers (80 nm) were spun onto ITO substrates and aluminum cathode (100 nm) was deposited under vacuum pressure of about 1×10-3 Pa. The electroluminescent properties of the devices were investigated and TTP dominated red emission was observed. The electroluminescent emission from TTP increased as the increasing of doping level in light-emitting layer. On the other hand, the emission of MEH-PPV reduced gra-dually until the doping level of 8 percent. Then it began to grow. The results of photoluminescence and electroluminescence expressed that the two emission processes followed different mechanisms. TTP could be a center for capturing exitons in electroluminescence and the emission of TTP involved the capture of electrons and holes by itself apart from Frster-type energy transfer from MEH-PPV. The researches on TTP doped conjugated polymers will be helpful to enlarge the application of dye, porphyrin, in OLEDs. Moreover, the researches on the mechanisms of photoluminescence and electroluminescence for the blended systems will provide scientific basis for color tuning of composite materials.

Syntheses and Eletroluminescence Properties of Red Emitting Copolymers with Different Lengths of Diketopyrrolopyrrole Units

Synthesis and performances of chelating electrophosphorescent polymers based on different ancillary ligands

Novel poly(phenylene ethynylene)-type conjugated polymers containing diketopyrrolopyrrole or triphenylpyrazoline units in the main chain: synthesis, characterization and photophysical properties

Utilization of Water/Alcohol-Soluble Polyelectrolyte As an Electron Injection Layer for Fabrication of High-Efficiency Multilayer Saturated Red-Phosphorescence Polymer Light-Emitting Diodes by Solution Processing

Application of Heteroleptic Iridium Complexes with Fluorenyl-Modified 1-Phenylisoquinoline Ligand for High-Efficiency Red Polymer Light-Emitting Devices

Monochromatic-Red-Light Emission of Novel Copolymers Containing Carbazole Units and Europium-Acrylate Complexes

Efficient, saturated red electroluminescent devices with modified pyran-containing emitters

Novel Red Light-Emitting Polymers Based on 2,7-Carbazole and Thiophene Derivatives

Synthesis, Photophysics and Electroluminescent Properties of a Novel Phenylene-Ethynylene and Bezothiadiazole Alternating Copolymer

Saturated Red Electroluminescence From Thermally Activated Delayed Fluorescence Conjugated Polymers

Synthesis and Light-Emitting Properties of Novel Red Electrophosphorescent Fluorene-Alt-Carbazole Copolymers

Novel 1,4-diketo-3,6-diphenyl pyrrolo[3,4-c]pyrrole (DPP)-based copolymers with large Stokes shift

Efficient Saturated Red Light-Emitting Polyfluorenes Containing Iridium Complexes in Side Chains

Synthesis and Electroluminescent Properties of a Phenothiazine‐based Polymer for Nondoped Polymer Light‐emitting Diodes with a Stable Orange‐red Emission

FLUORENE-BASED COPOLYMERS FOR RED LIGHT-EMITTING DIODES AND BULK HETEROJUNCTION PHOTOVOLTAIC CELL

Polyfluorene Derivatives Pending Iridium Complexes: Improved Optoelectronic Properties by Introducing D‐A Units and Altering Pendent Mode

A stable red emission in polymer light-emitting diodes based on phenothiazine derivative

Monochromic red-emitting nonconjugated copolymers containing double-carrier-trapping phosphine oxide Eu3+ segments: Toward bright and efficient electroluminescence

Luminescent Properties of Porphyrin Doped Poly [2-Methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene]

Synthesis of π-Conjugated Polymers Containing Benzotriazole Units via Palladium-Catalyzed Direct C-H Cross-Coupling Polycondensation for OLEDs Applications

A dithienyl benzotriazole-based polyfluorene: Synthesis and applications in polymer solar cells and red light-emitting diodes