Abstract:Magnetic flux leakage (MFL) inspection employs leakage magnetic fields to effectively detect and locate pipeline defects. The spacing between magnetic poles significantly affects the leakage magnetic field strength. While most detectors typically opt for moderate pole spacing for routine detection, this study investigates the propagation characteristics of MFL signals at small pole spacings (under specimen oversaturated magnetization) and their impact on MFL detection. Through finite element simulation and experiments, it reveals a new signal phenomenon in the radial MFL signal By at small pole spacings, the double peak-valley (DPV) phenomenon, characterized by outer and inner peaks and valleys. Theoretical analysis based on the simulation results elucidates the mechanisms for this DPV phenomenon. Based on this, the impact of defect size, pipe wall thickness, and magnetic pole and rigid brush height on MFL signals under small magnetic pole spacings is examined. It is demonstrated that, under a smaller magnetic pole spacing, a potent background magnetic field manifests in the air above the defect. This DPV phenomenon is generated by the magnetic diffusion and compression interactions between the background and defect leakage magnetic fields. Notably, the intensity of the background magnetic field can be mitigated by reducing the height of the rigid brush. In contrast, the pipe wall thickness and magnetic pole height exhibit a negligible influence on the DPV phenomenon. The emergence of the DPV precipitates a reduction in the peak-to-valley difference within the MFL signal, constricting the depth range of detectable defects. However, the presence of DPV increases the identification of defects with smaller opening sizes. These findings reveal the characterization of the MFL signal under small pole spacing, offering a preliminary study on identifying specific defects using unconventional signals. This study provides valuable guidance for MFL detection.

Analysis of MFL signal characteristics using physical field

Theoretical Analyses of MFL Signal Affected by Discontinuity Orientation and Sensor-Scanning Direction

Quantitative Interpretation Methods for Magnetic Flux Leakage Testing Signals

New MFL Nondestructive Testing Method Based on Magnetic Vacuum Leakage

A Review of Magnetic Flux Leakage Nondestructive Testing

Quantitative Study on MFL Signal of Pipeline Composite Defect Based on Improved Magnetic Charge Model

Application of autocorrelation analysis in magnetic flux leakage testing signal processing

Analysis of Permanent Magnetic Field in Defects of Casing Based on Finite Element Method

Overview of Defect Magnetic Flux Leakage Imaging Technology

Study of MFL signal identification in pipelines based on non-uniform magnetic charge distribution patterns

A Defect Opening Profile Estimation Method Based on the Right-Angle Characteristic of Vertical Component of MFL Signal

Solenoid model for visualizing magnetic flux leakage testing of complex defects

A Simplified Calculation Model of MFL Signal of Defect Based on Lift-off Value

Application of Computer Finite Element Simulation to the Quantitative Inspection of Flaw MFL

A new MFL principle and method based on near-zero background magnetic field

Study on the Impact of Pole Spacing on Magnetic Flux Leakage Detection under Oversaturated Magnetization

A Basic Signal Analysis Approach for Magnetic Flux Leakage Response

Quantization of magnetic flux leakage internal detection signals for composite defects of gas and oil pipelines

A 3-D Pseudo Magnetic Flux Leakage (PMFL) Signal Processing Technique for Defect Imaging

A Method for Identifying Inclined Defects by Using Magnetic Flux Leakage Spectral Envelope Detection

An Element-Scaling-revising Method (ESRM) for Magnetic Flux Leakage Signal Analysis