Abstract:Magnetic flux leakage (MFL) inspection employs leakage magnetic fields to effectively detect and locate pipeline defects. The spacing between magnetic poles significantly affects the leakage magnetic field strength. While most detectors typically opt for moderate pole spacing for routine detection, this study investigates the propagation characteristics of MFL signals at small pole spacings (under specimen oversaturated magnetization) and their impact on MFL detection. Through finite element simulation and experiments, it reveals a new signal phenomenon in the radial MFL signal By at small pole spacings, the double peak-valley (DPV) phenomenon, characterized by outer and inner peaks and valleys. Theoretical analysis based on the simulation results elucidates the mechanisms for this DPV phenomenon. Based on this, the impact of defect size, pipe wall thickness, and magnetic pole and rigid brush height on MFL signals under small magnetic pole spacings is examined. It is demonstrated that, under a smaller magnetic pole spacing, a potent background magnetic field manifests in the air above the defect. This DPV phenomenon is generated by the magnetic diffusion and compression interactions between the background and defect leakage magnetic fields. Notably, the intensity of the background magnetic field can be mitigated by reducing the height of the rigid brush. In contrast, the pipe wall thickness and magnetic pole height exhibit a negligible influence on the DPV phenomenon. The emergence of the DPV precipitates a reduction in the peak-to-valley difference within the MFL signal, constricting the depth range of detectable defects. However, the presence of DPV increases the identification of defects with smaller opening sizes. These findings reveal the characterization of the MFL signal under small pole spacing, offering a preliminary study on identifying specific defects using unconventional signals. This study provides valuable guidance for MFL detection.

Theoretical Analyses of MFL Signal Affected by Discontinuity Orientation and Sensor-Scanning Direction

A Review of Magnetic Flux Leakage Nondestructive Testing

Study on the Impact of Pole Spacing on Magnetic Flux Leakage Detection under Oversaturated Magnetization

A new MFL principle and method based on near-zero background magnetic field

Quantitative Interpretation Methods for Magnetic Flux Leakage Testing Signals

Quantitative Study on MFL Signal of Pipeline Composite Defect Based on Improved Magnetic Charge Model

Research on magnetic inversion in alternating current magnetic flux leakage testing

A 3-D Pseudo Magnetic Flux Leakage (PMFL) Signal Processing Technique for Defect Imaging

Influences of Magnetization Direction on the Flux Leakage Field of Weld Defects

Magnetic leakage behavior assessment in pipeline stress-concentrated areas using improved force-magnetic coupling model

An Improved MFL Method Fusing Multi-Space Magnetic Field Information for The Surface Defect Inspecting

A Novel Defect Quantification Method Utilizing Multi-Sensor Magnetic Flux Leakage Signal Fusion

A Method for Identifying Inclined Defects by Using Magnetic Flux Leakage Spectral Envelope Detection

A Sensor Liftoff Modification Method of Magnetic Flux Leakage Signal for Defect Profile Estimation

Overview of Defect Magnetic Flux Leakage Imaging Technology

An Opening Profile Recognition Method for Magnetic Flux Leakage Signals of Defect

Nondestructive Testing Method for Internal Defects in Ferromagnetic Materials under Weak Bias Magnetization

The defect depth evaluation based on the dual-sensor strategy: Resisting the lift-off disturbance in magnetic flux leakage testing

A Double Remote Magnetic Field Synthesis Method for Reducing High-speed MFL Signal Distortion Caused by Velocity Effect

Theoretical Analysis on the Distribution of Eddy Current in Motion-Induced Eddy Current Testing and High-Speed MFL Testing

A Novel Crack Quantification Method for Ultra-High-Definition Magnetic Flux Leakage Detection in Pipeline Inspection