Abstract:The relevant phase transformations induced by atomic diffusion at the vicinity of Nb/TiAl heterogenous interface were systematically investigated by establishing a novel system of TiAl-Nb couple via metallurgical bonding of Nb block and γ-TiAl powders by hot pressing sintering and post-annealing treatments. As a result, the resultant diffusion layer, acting as adhesive region linking the Nb and TiAl substrates, thickened with the increase of annealing temperature and the prolongation of holding time, which could be well described by the developed power function. A series of intermediate phases initially nucleated at the Nb/TiAl interface and grew toward both substrates, which was the result of the exchange, partitioning and recombination of solute atoms in the light of vacancy-mediated substitutional diffusion pattern. The phase transformation path on the Nb side was β→η→η + σ→σ→β 0 →β 0 + γ n , while that on the TiAl side was γ→γ ss →γ ss + α→(γ + α)+ (α + β 0 )→α + β 0 →β 0 + γ n . Then the disorder-order transition of α→α 2 and β 0 →B2 occurred during cooling. The progress of phase transformation slowed down as the diffusion proceeded, which was attributed to the decrease in atomic substitution efficiency due to the reduction of atomic concentration gradient and the extension of migration distance. In such a case, the banded σ ba split into spike σ sp along the direction of maximum concentration gradient, and then shrunk to isolated σ is until completely dissolved in β 0 regime, principally dominated by Ti occupying Nb sublattices. The lenticular γ n existed mainly in the form of twins, resulting from the lattice reconstruction in accordance with the orientation relationship of 111γ//110β0 and 1̅10γ//11̅1β0 in the Al partitioning region during the spontaneous fluctuation of atomic concentration of β 0 regime. These findings filled some fundamental gaps with respect to TiAl-Nb diffusion reaction system, and afforded profound insights into the development of high-performance TiAl/Nb composites with tailorable microstructure.

Effects of Alloying Element Ti on Α-Nb5si3and Nb3Al from First Principles

Effect of Alloying Elements on Lattice Misfit and Elasticities of Ni-based Single Crystal Superalloys by First-Principle Calculations

The Effect of Nb Doping on the Properties of Ti-Al Intermetallic Compounds Using First-Principles Calculations

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

First-principles Investigation on Alloying Effect of Nb and Mo in Γ-Tial

Structures of melt-spun and high-energy ball milled Al3Ti-Mn-Nb intermetallic alloy

Effects of Niobium on Phase Composition and Improving Mechanical Properties in TiAl Alloy Reinforced by Ti2AlC

Effects of Nb on Microstructure and Mechanical Properties of Ti42Al2.6C Alloys

Investigation of the ordering and atomic site occupancies of Nb-doped TiAl/Ti3Al intermetallics

Effects of Al Contents on Microstructure of Nb-Ti-C Alloys

Stoichiometric and Off-Stoichiometric Alloying in Silicide Compound Ti5Si3 by Nb or Cr Additions

Stoichiometric and off-stoichiometric alloying in ti5si3 by nb or cr addition

Theoretical Study of the Effects of Alloying Elements on TiO2/Ti2AlNb Interface Adhesion Properties.

Effects of Alloying on the Microstructures and Mechanical Property of Nb-Mo-Si Based in Situ Composites

On the Alloying and Properties of Tetragonal Nb5Si3 in Nb-Silicide Based Alloys

Electronic Structure Of Ti2alnb (O Phase)

Effect Of Nb Additions On Phase Formation In Ll(2) Type Al3ti-8mn-Based Alloys

Atomic diffusion and microstructural evolution at the Nb/TiAl heterogenous interfaces during annealing at elevated temperatures

Energetic Effects of Dopants on the Eutectoid Decomposition of Nb–Siin Situcomposites

Preferential site occupancy of alloying elements in TiAl-based phases