Abstract:Strengthening effect of carbon nanotubes (CNTs) reinforced metal matrix composites (MMCs) mainly depends on the interfacial bonding strength which has a decisive influence on comprehensive properties of the composites. However, in CNTs reinforced Cu matrix composites, poor interface bonding due to the lack of wettability between CNTs and Cu matrix has become a bottleneck problem restricting the load-transfer capacity of CNTs. Different from the conventional thoughts of producing interfacial carbides by in-situ reaction with CNTs which will lead to deterioration of structural integrity of CNTs, a novel strategy is used by forming TiC on the surface of intact CNTs through solid phase reaction between the pre-milled CNTs and the Ti powders. The mechanical properties of the composites can be regulated by tailoring the morphology and amount of TiC decorated at the interface. Strong interfacial bonding achieved due to the specially designed interface structure which contributes to the dramatic improvement of strengthening efficiency of CNTs and benefits the plastic deformation of Cu matrix. Consequently, a simultaneous enhancement of tensile strength (281 MPa) and tensile elongation (20.1%) is achieved in the composite with TiC decorated at the interface, and a super high strengthening efficiency (135.8) is realized. The tactic used in our study can provide a reference for the preparation of other CNTs/MMCs.

Fabrication and Characterization of Carbon Nanotube-Titanium Nitride Composites with Enhanced Electrical and Electrochemical Properties

Carbon Nanotubes–metal Nitride Composites: a New Class of Nanocomposites with Enhanced Electrical Properties

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

A study of the electrical properties of carbon nanotube-NiFe 2O4 composites: Effect of the surface treatment of the carbon nanotubes

In–situ growth of carbon nanotubes on Two–Dimensional titanium carbide for enhanced electrochemical performance

Electrochemical performance of TiO 2 /carbon nanotubes nanocomposite prepared by an in situ route for Li-ion batteries

Densified Multiwalled Carbon Nanotubes–titanium Nitride Composites with Enhanced Thermal Properties

Carbon Nanotubes−Magnetite Nanocomposites from Solvothermal Processes: Formation, Characterization, and Enhanced Electrical Properties

Optimization of the mechanical properties of CNTs/Cu composite by regulating the size of interfacial TiC

Regulating the mechanical properties and electrical conductivity of CNTs/Cu composites by tailoring nano-sized TiC on the surface of intact CNTs

Sintering And Enhanced Mechanical Properties Of Densified Multiwalled Carbon Nanotube/Tin Composites

Multiwalled Carbon Nanotubes–TiB2–Ni Composite: Microstructure and Mechanical Properties

Carbon Nanotube/Epoxy Composites Fabricated by Resin Transfer Molding

Ti3O5 nanofilm on carbon nanotubes by pulse laser deposition: Enhanced electrochemical performance

Research of Carbon Nanotubes-Cu Composite with Interpenetrating Networks

Synthesis of TiN@C Nanocomposites for Enhanced Electrochemical Properties

Fabrication of Carbon Nanotube Reinforced Al Composites with Well-Balanced Strength and Ductility

Effect of Carbon Nanotube (CNT) Content on the Properties of In-Situ Synthesis CNT Reinforced Al Composites

Mechanical Fabrication of Carbon Nanotube/tio2 Nanoparticle Composite Films and Their Field‐emission Properties

Electroless Fabrication and Supercapacitor Performance of Cnt@Nio-Nanosheet Composite Nanotubes

Fabrication of Al-CNT composite with high hardness and electrical conductivity by controlling Al 4 C 3 formation