Abstract:Tubular solid oxide fuel cells were fabricated and evaluated for their microstructure and electrochemical performance. The tubular substrate was prepared by casting NiO-Y 2 O 3 stabilized ZrO 2 (YSZ) slurry on the inner wall of a plastic mold (tube). The wall thickness and uniformity were controlled by slurry viscosity and rotation speed of the tube. The cells consisted of Ni-YSZ functional anode, YSZ electrolyte and (La 0.8 Sr 0.2 ) 0.95 MnO 3-δ (LSM)-YSZ cathode prepared in sequence on the substrate by dip-coating and sintering. Their dimension was 50 mm in length, 0.8 mm in thickness and 10.5 mm in outside diameter. The peak power density of the cell at temperatures between 650 and 850°C was in the range from 85 to 522 mW cm −2 and was greatly enhanced to the range from 308 to 1220 mW cm −2 by impregnating PdO into LSM-YSZ cathode. During a cell testing at 0.7 A cm −2 and 750°C for 282 h, the impregnated PdO particles grew by coalescence, which increased the cathode polarization resistance and so that decreased the cell performance. According to the degradation tendency, the cell performance will be stabilized in a longer run.

Study on YSZ film fuel cell by slurry spin coating method

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

YSZ Films Fabricated by a Spin Smoothing Technique and Its Application in Solid Oxide Fuel Cell

Fabrication and Performance of Anode-Supported YSZ Films by Slurry Spin Coating

Preparation and Performance of YSZ Thin-Film by Centrifugal Deposition Technique

Study of YSZ Electrolyte Film Fabricated by Suspension

Ni–Sm0.2Ce0.8O1.9 Anode-Supported YSZ Electrolyte Film and Its Application in Solid Oxide Fuel Cells

Performance Evaluation of Thin Membranes Solid Oxide Fuel Cell Prepared by Pressure-Assisted Slurry-Casting

Study of Slurry Spin Coating Technique Parameters for the Fabrication of Anode-Supported YSZ Films for SOFCs

A Novel Method for Fabrication of Y2O3‐Stabilized ZrO2 Electrolyte Films

Behavior of 3 Mol% Yttria-Stabilized Tetragonal Zirconia Polycrystal Film Prepared by Slurry Spin Coating

Fabrication of an Anode-Supported Yttria-Stabilized Zirconia Thin Film for Solid-Oxide Fuel Cells Via Wet Powder Spraying

Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells

Anode-supported YSZ Film Fabricated by Using Micron-Sized Particles

Screen-Printed Thin Ysz Films Used As Electrolytes for Solid Oxide Fuel Cells

Preparation of YSZ thin films for intermediate temperature solid oxide fuel cells by dip-coating method

Preparation of YSZ Film by Gravity-Electrophoretic Deposition and Its Application in SOFC

Preparation of YSZ films by magnetron sputtering for anode-supported SOFC

High Performance Anode-Supported Tubular Solid Oxide Fuel Cells Fabricated by a Novel Slurry-Casting Method

A Symmetrical Solid Oxide Fuel Cell Prepared by Dry-Pressing and Impregnating Methods

Performance Evaluation of Solid Oxide Fuel Cells with Thin Film Electrolyte Fabricated by Binder‐Assisted Slurry Casting