Abstract:Abstract Power scaling based on traditional ytterbium-doped fibers (YDFs) is limited by optical nonlinear effects and transverse mode instability (TMI) in high-power fiber lasers. Here, we propose a novel long tapered fiber with a constant cladding and tapered core (CCTC) along its axis direction. The tapered-core region of the fiber is designed to enhance the stimulated Raman scattering (SRS) threshold and suppress higher-order mode resonance in the laser cavity. The CCTC YDF was fabricated successfully with a modified chemical vapor deposition (MCVD) method combined with solution doping technology, which has a cladding diameter of 400 μm and a varying core with a diameter of ~24 μm at both ends and ~31 μm in the middle. To test the performance of the CCTC fiber during high-power operation, an all-fiber laser oscillator based on a CCTC YDF was investigated experimentally. As a result, a maximum output power of 3.42 kW was achieved with an optical-to-optical efficiency of 55.2%, although the TMI effect was observed at an output power of ~3.12 kW. The measured beam quality ( M 2 factor) was ~1.7, and no sign of the Raman component was observed in the spectrum. We believe that CCTC YDF has great potential to simultaneously mitigate the SRS and TMI effects, and further power scaling is promising by optimizing the structure of the YDF.

Analysis of Raman and thermal effects in kilowatt fiber lasers

Theoretical analysis of the heat dissipation mechanism in Yb3+-doped double-clad fiber lasers

Thermal Analysis of Kilowatt Yb3+ Double-clad Fiber Lasers

Stimulated Raman scattering and thermal stress in double clad fiber laser

Numerical Analysis of Temperature Distributions in Yb-Doped Double-Clad Fiber Lasers with Consideration of Radiative Heat Transfer

Analysis on Thermal Characteristic of Ytterbium-Doped Fiber Lasers

Analysis of Thermal Effects in A Pulsed Laser Diode End Pumped Single-Ended Composite Tm:Yag Laser

Numerical Analysis of Yb3+-Doped Double-Clad Fiber Laser

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Theoretical Analysis and Heat Dissipation of Mid-Infrared Chalcogenide Fiber Raman Laser

Theoretical analysis of the heat dissipation mechanism in high power photonic crystal fiber lasers

Thermal effect analysis on cuboid Pr:YLF crystals pumped by blue laser diodes

532 nm pump induced photo-darkening inhibition and photo-bleaching in high power Yb-doped fiber amplifiers

Numerical Analysis and Experimental Results of Output Characteristics for Strongly Pumped Yb3+-doped Double-Clad Fiber Laser

The theoretical calculation and output characteristic analysis of Yb doped fiber laser

Inelastic scatterings in high-power back-pumped ytterbium-doped double-clad fiber amplifiers

The theoretical analysis and simulation of double cladding Er/Yb Co doped optical fiber laser

Analysis of one-end-pumped Yb<sup>3+</sup>-doped gain guided and index antiguided fiber laser

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Four-Dimensional Thermal Analysis of 888 Nm Pumped Nd:Yvo4 Dual-Rod Acousto-Optic Q-Switched Laser

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator