Abstract:Buried pipelines are widely used, so it is necessary to analyze and study their fracture characteristics. The locations of corrosion defects on the pipe are more susceptible to fracture under the influence of internal pressure generated during material transportation. In the open literature, a large number of studies have been conducted on the failure pressure or residual strength of corroded pipelines. On this basis, this study conducts a fracture analysis on buried pipelines with corrosion areas under seismic loads. The extended finite element method was used to model and analyze the buried pipeline under seismic load, and it was found that the stress value at the crack tip was maximum when the circumferential angle of the crack was near 5° in the corrosion area. The changes in the stress field at the crack tip in the corrosion zone of the pipeline under different loads were compared. Based on the BP algorithm, a neural network model that can predict the stress field at the pipe crack tip is established. The neural network is trained using numerical model data, and a prediction model with a prediction error of less than 10% is constructed. The crack tip characteristics were further studied using the BP neural network model, and it was determined that the tip stress fluctuation range is between 450 MPa and 500 MPa. The neural network model is optimized based on the GA algorithm, which solves the problem of convergence difficulties and improves the prediction accuracy. According to the prediction results, it is found that when the internal pressure increases, the corrosion depth will significantly affect the crack tip stress field. The maximum error of the optimized neural network is 5.32%. The calculation data of the optimized neural network model were compared with the calculation data of other models, and it was determined that GA-BPNN has better adaptability in this research problem.

APPLICATION OF CORROSION RATE PREDICTION MODEL BASED ON BP NEURAL NETWORK IN REFINERY

Application of Neural Networks to Chemical Fault Diagnosis

An Efficient Corrosion Prediction Model Based on Genetic Feedback Propagation Neural Network

Prediction Model of Corrosion Rate for Oil and Gas Pipelines Based on Knowledge Graph and Neural Network

Direct Prediction of Steam Cracking Products from Naphtha Bulk Properties: Application of the Two Sub-Networks ANN

Modeling of Corrosion Rate Under Two Phase Flow in Horizontal Pipe Using Neural Network

Prediction of Anoxic Sulfide Biooxidation under Various Hrts Using Artificial Neural Networks

Application of Neural Network in the Study of Combustion Rate of Natural Gas/diesel Dual Fuel Engine.

Evaluation of Corrosion Residual Life Prediction Methods for Metal Pipelines

Prediction of Water Quality Index in Qiantang River Based on BP Neural Network Model

Numerical Simulation and ANN Prediction of Crack Problems within Corrosion Defects

USING GRAY MODEL TO PREDICT CORROSION RATE VARIATION WITH TIME IN INJECTING PIPELINE

Research on Oil Ferrography Analysis Fault Diagnosis of Diesel Engine Based on BP Neural Network

A new hybrid algorithm model for prediction of internal corrosion rate of multiphase pipeline

Advanced Machine Learning Techniques for Corrosion Rate Estimation and Prediction in Industrial Cooling Water Pipelines

Development of machine learning algorithms for predicting internal corrosion of crude oil and natural gas pipelines

A study of neural network-based evaluation methods for pipelines with multiple corrosive regions

Improvement of the machine learning-based corrosion rate prediction model through the optimization of input features

Development of a Predictive Model for Carbon Dioxide Corrosion Rate and Severity Based on Machine Learning Algorithms

Comparison of Response Surface Methodologies and Artificial Neural Network Approaches to Predict the Corrosion Rate of Carbon Steel in Soil

An improved prediction algorithm of seamless tubing corrosion based on an extension neural network