Abstract:Advanced intermetallic beta-solidifying gamma-TiAl-based alloys have various potential applications in the aerospace and automobile industries due to their low density, functionality at higher temperatures, and high specific strength/modulus. The crucial aspect that needs to be considered when developing a new beta-solidifying gamma-TiAl alloy is to clarify the influence law of beta-stabilizer elements on the phase transformation behavior of gamma-TiAl alloys. In this work, the impact of W contents (0.5%-1.0%, atomic fraction) on the phase transformation behavior and microstructure characteristics of Ti-42Al-5Mn-xW (atomic fraction) alloy with low cost and superior temperature workability was systematically investigated. The findings demonstrate that there were minor changes in the beta-phase single region temperature (T-beta) and gamma phase solvus temperature (T gamma-solv); furthermore, the eutectoid reaction temperature (T-eut) increases with the W content from 0.5% to 1.0%. Addition of W influences the solid phase transformation pathway to a certain extent. When the concentration of W increases to 0.5%, the equilibrium phase of the alloy at near service temperature gradually changes from alpha(2) + gamma + Laves to beta(o) + alpha(2) + gamma + Laves. Additionally, W addition will also have a substantial effect on the lamellar microstructure. The volume fraction of lamellar microstructure considerably decreased after alloying with (0.5%-1.0%)W for Ti-42Al-5Mn alloy when being treated in the (gamma + alpha + beta) triple-phase region followed by furnace cooling. Increasing the W content to 0.8% and 1.0% results in the development of gamma and beta(o) grain phases with almost complete removal of alpha(2)/gamma lamellar structures. However, the W-free and W-bearing Ti-42Al-5Mn alloys show near complete lamellar structures when treated in (alpha + beta) two-phase region followed by furnace cooling. Furthermore, when the content of W increased from 0.5% to 1.0%, an equiaxed grain structure with refined lamellar colonies is typically obtained.

Effects of Tungsten and Microstructures of Ti-Al-Nb-W-B Alloy under Different Treatment Processes

The Effect of A Small Amount of Tungsten on the Microstructure of Mechanically Alloyed Ag37cu63

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Microstructure Evolution of Ti–46Al–6Nb–（Si,B） Alloys During Heat Treatment with W Addition

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

Effect of Nb and B on the Precipitation Behaviors in Al-Ti-Nb Balanced Ratio Ni-Based Superalloy: A Phase-Field Study

Effect of heat treatment and thermomechanical processing on microstructure and tensile property of Ti-44Al-8Nb-0.2W-0.2B-0.5Y alloy

Effects of Nb on Microstructure and Mechanical Properties of Ti42Al2.6C Alloys

Microstructure Evolution and Mechanical Properties of High Nb-TiAl Intermetallic Compounds during Heat Treatment

Effect of Tungsten on the Microstructure Evolution and Mechanical Properties of Yttrium Modified HP40Nb Alloy

Effects of Al Contents on Microstructure of Nb-Ti-C Alloys

Effect of Heat Treatment on Microstructures and Mechanical Properties of a Novel Β-Solidifying TiAl Alloy

Effects of W on the Unidirectional Solidification Structures of TiAl Based Alloy

Effects of Niobium and Ultrasonic Action Coupling on Microstructure Evolution and Mechanical Properties of Ti46Al2.6 C Alloy

Effect of W Content on the Phase Transformation Behavior in Ti-42Al-5Mn-<i>x</i>W Alloy

Effects of Nanosized Particles on Microstructure and Mechanical Properties of an Aged In-Situ TiB2/Al-Cu-Li Composite

B2 phase precipitation behavior in Ti–40Al–8Nb alloys during the hot deformation process

Microstructure and Elevated Temperature Tensile Property of Ti–46Al–7Nb-(W,Cr,B) Alloy Compared with Binary and Ternary TiAl Alloy

Effects of Forming Conditions and TiC–TiB 2 Contents on the Microstructures of Self-Propagating High-Temperature Synthesized NiAl–TiC–TiB 2 Composites

Effect of Heat Treatment on the Microstructure of Multiphase Nial-Based Alloy

Multi-scale Study of Microstructure Evolution in Hot Extruded Nano-Sized TiB2 Particle Reinforced Aluminum Composites