Abstract:Thermal insulation materials are widely used in the fields of thermal protection and the energy conservation at high temperature. Thermal conductivity is one of the most important parameters of characterizing the thermal insulation performance of thermal protection materials. Steady state method such as the guarded hot plate method is normally considered as the most accurate method to measure the thermal conductivity of thermal insulation materials, but the temperature range is limited to below 1000 K. Unsteady state method can be employed at higher temperature but the accuracy is lacking of validation. Consequently, thermal verification experiments are usually conducted by heating the front surface of thermal insulation materials to a very high temperature. However, it is difficult to obtain the temperature-dependent thermal conductivity by using the thermal insulation performance measured with a large temperature difference across the material. In this study, a sandwich structure experimental system is built to carry out the thermal insulation performance tests with a large temperature difference at both steady state and transient state. Both uniform temperature layer method and polynomial fitting method are adopted to extract the temperature-dependent thermal conductivity from the large temperature difference test at steady state. A new transient state identification method is proposed based on the niche genetic algorithm to identify the relation between thermal conductivity and temperature from the transient thermal response. The temperature-dependent thermal conductivity of four thermal protection materials are finally obtained. The identification results prove that the proposed transient identification method is reliable and robust.

Testing Method of Effective Thermal Conductivity of Fibrous Insulations

Analysis of Heat Transfer and Effective Thermal Conductivity of High Temperature Fibrous Insulation for Thermal Protection System

An Experimental Study of Effective Thermal Conductivity of High Temperature Insulations

Experimental investigation on thermal contact resistance of alumina fibrous insulation material with Ti-6Al-4V alloy at high temperature and its effective thermal conductivity

Experimental and theoretical studies on high-temperature thermal properties of fibrous insulation

Research on insulation properties of high-speed aircraft lightweight heat-resistant materials in high-temperature environment

Thermal analysis and performance study of high temperature fibrous insulation for metallic thermal protection system

Theoretical and Experimental Study on a Compound Insulation System for High Temperature Applications

A Theoretical analysis and experimental study of effective thermal conductivities of high temperature insulations

Insulation Performance of Heat-Resistant Material for High-Speed Aircraft Under Thermal Environments

Numerical and Experimental Studies on the In-Situ Measurement of Thermal Conductivity of the Thermal Barrier Coating

Thermal Conductivity Measurement of Carbon Felt Used in High Temperature Gas-cooled Reactor and Inverse Problem Calculation

Heat transfer analysis on thickness of fibrous insulations of metallic thermal protection system

Measurement and identification of temperature-dependent thermal conductivity for thermal insulation materials under large temperature difference

Temperature Measuring System in High Temperature Carbon Reducing Environment

Design of Thermal Protection Structures for High Temperature Thermophysical Property Testing System

Radiation heating tests to evaluate low-emissivity porous ceramics coatings for stand-off thermal protection systems

High Temperature Thermal Physical Properties of High-Alumina Fibrous Insulation

Equivalent Thermal Conductivity of Non-expansive Fireproof Coating and Its Test Method

Finite Element Analysis of Metallic Thermal Protection Systems Design

PROGRESS IN THERMAL CONDUCTIVITY TESTING AT CRYOGENIC