Abstract:Globally, the amounts of metal ore deposits have been declining, so the research directions investigating the extraction of metals from materials that are classified as waste are gaining more importance every year. High concentrations of Cu, Pb, Zn, and Fe were analyzed in the sludge sediment (Zlaté Hory, Czech Republic), which is a waste product of the mining industry. In the bioleaching process, bacterial cells have been established as being able to convert metals from solid to liquid phase. However, the most important parameters of bioleaching are particle size, pH, and pulp density, thus our research focused on their optimization. The acidophilic and mesophilic bacteria Acidithiobacillus ferrooxidans were applied due to the high Fe content in the sample. The recovery of metals in the leachate was determined by F-AAS and the residual metal concentrations in the waste fraction were analyzed by XRF. The grain size fractions <40 μm –200 μm were investigated. The atomic absorption spectrometry (AAS) results show that the highest Fe (76.48%), Cu (82.01%), and Pb (88.90%) recoveries were obtained at particle size of 71–100 μm. Zn was dissolved for all fractions above 90%. Experiments with different pH values were performed at a pH of 1.6–2.0. The highest dissolution rates of Zn, Fe, and Cu were achieved with a suspension pH of 1.8, where 98.73% of Zn, 85.42% of Fe, and 96.44% of Cu were recovered. Due to the high percentage dissolution of metals, experiments were performed under pilot conditions in a bioreactor at a pulp density of 2.5% and 4.2% (w/v). From an economic point of view, the leaching time of 28 days was evaluated as sufficient.

Removal of Heavy Metals from Activated Sludge by Bioleaching Method

Removal of Heavy Metals in Sewage Sludge and Losses of Nutrition During Bioleaching

Removal of Cr from tannery sludge by indigenous sulfur-oxidizing bacteria.

Removal of Heavy Metals from Sewage Sludge with a Combination of Bioleaching and Electrokinetic Remediation Technology

The combination of aerobic digestion and bioleaching for heavy metal removal from excess sludge

Removal of Heavy Metals from MSWI Fly Ash Using Acidithiobacillus Strains: Effects of Substrate Concentration

Extracting heavy metals from electroplating sludge by acid and bioelectrical leaching using <i>Acidithiobacillus ferrooxidans</i>

Optimization of Kinetics and Operating Parameters for the Bioleaching of Heavy Metals from Sewage Sludge, Using Co-Inoculation of Two Acidithiobacillus Species.

Removal behavior and chemical speciation distributions of heavy metals in sewage sludge during bioleaching and combined bioleaching/Fenton-like processes

[Effect of simulated heavy metal leaching solution of electroplating sludge on the bioactivity of Acidithiobacillus ferrooxidans]

Removal of Heavy Metals from Electroplating Sludge by Electrokinetic Enhancement Technology

Electrokinetic removal and recycling of heavy metals from sewage sludge with citric acid complexation

Electrokinetic deposition and removal of heavy metals from sewage sludge enhanced with ammonia complexation

Bioleaching of Iron, Copper, Lead, and Zinc from the Sludge Mining Sediment at Different Particle Sizes, pH, and Pulp Density Using Acidithiobacillus ferrooxidans

Comparison of two different combined bioleaching-electrokinetic remediation processes

Bioleaching of heavy metals from sewage sludge by indigenous iron-oxidizing microorganisms using ammonium ferrous sulfate and ferrous sulfate as energy sources: a comparative study

Effect of substrate on bioleaching of Cu,Zn from sewage sludge

Electrokinetic Gathering and Removal of Heavy Metals from Sewage Sludge by Ethylenediamine Chelation

Ammonium-based bioleaching of toxic metals from sewage sludge in a continuous bioreactor

Activated Sludge Process Enabling Highly Efficient Removal of Heavy Metal in Wastewater

Enhancing sludge dewatering and heavy metal removal by bioleaching with Na2S2O3 as substrates