Abstract:The current experimental methods are not able to reveal the actual processes of atomic movements during twinning and thus are incapable of clarifying the underlying mechanisms of annealing twinning, which are still not clear at present. We developed a method of molecular dynamics simulation to study the mechanism of annealing twinning in copper at an atomic-level. The simulation revealed that a annealing twin can be developed quickly from a pair of grains with Sigma 3 misorientation interfaced by a ((511) over bar)/((1) over bar 11) asymmetric boundary. The twinning proceeds by a mechanism in which every three adjacent ((511) over bar) atomic layers merge into a ((111) over bar) layer in the ((511) over bar) side, while the atomic arrangement in the ((1) over bar 11) side remains unchanged. Such twinning takes place readily upon annealing at temperatures ranging from 700 to 1300 K, without requiring any extra driving force, indicating that annealing twinning in copper is indeed a thermally activated process with an activation energy estimated to be 0.1 eV. Similar annealing twinning is also observed in another two pairs of grains with Sigma 3 misorientation interfaced by ((8) over bar 22)/(022) and ((2) over bar 44)/((2) over bar 00) asymmetric boundaries, respectively, yet their twinning rates are much slower than that of the ((511) over bar)/((1) over bar 11) grain pair, suggesting a different mechanism governing the process. The simulation also suggested that annealing twinning may involve two separate steps of which one is the formation of grain pairs with Sigma 3 misorientation and the other is the fine-tuning through which the grain pairs with Sigma 3 misorientation are converted into ideal annealing twins, which can grow larger with grain growth.

Anomalous hardening in copper due to the growth of deformation-induced micro-twins after annealing

Two softening stages in nanotwinned Cu

Annealing hardening in cryo-rolled high-entropy alloys by belated deformation twinning

Twinning During Recrystallization and Its Correlation with the Deformation Microstructure

An Atomic-Level Mechanism of Annealing Twinning in Copper Observed by Molecular Dynamics Simulation

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

Fivefold Annealing Twin in Nanocrystalline Cu

Multiple deformation mechanisms induced by pre-twinning in CoCrFeNi high entropy alloy

Formation of fivefold deformation twins in nanocrystalline face-centered-cubic copper based on molecular dynamics simulations

Unusual Twin Induced Recrystallization and Corresponding Texture Optimization in a Cold Rolled Mg-Gd-Zr Alloy During Annealing

Molecular dynamics simulation on mechanisms of plastic anisotropy in nanotwinned polycrystalline copper with {111} texture during tensile deformation

Migration Kinetics of Twinning Disconnections in Nanotwinned Cu: an in Situ HRTEM Deformation Study

Strain Hardening and Large Tensile Elongation in Ultrahigh-Strength Nano-Twinned Copper

Deformation twinning and detwinning in the lamella copper observed by in-situ TEM

In Situ Study of the Microstructural Evolution of Nickel-Based Superalloys with High Proportional Twin Boundaries Obtained by High-Temperature Annealing

A nucleation mechanism of deformation twins in pure aluminum

Anomalous Tensile Detwinning in Twinned Nanowires.

Anti-twinning in nanoscale tungsten

Size Dependence and Associated Formation Mechanism of Multiple-Fold Annealing Twins in Nanocrystalline Cu

Stress-induced Crystallographic and Microstructural Evolution for Hierarchically Twinned Martensite in Single- and Dual-Phase Ni-Mn-Ga Alloys

Deformation Twinning In Nanocrystalline Aluminum