Abstract:The filling stage in injection/infusion moulding processes plays a key role in composite manufacturing that can be influenced by the inlet and vent ports. This will affect the production of void-free parts and the desirable process time. Flow control is usually required in experiments to optimise such a stage; however, numerical simulations can be alternatively used to predict manufacturing-induced deficiencies and potentially remove them in the actual experiments. This study uses ANSYS Fluent software to model flow-front advancement during the impregnation of woven fabrics. A developed technique is applied by creating tracking points (e.g., on-line monitor) in the direction of the flow to report/collect data for flow-front positions as a function of time. The study adopts the FVM-VOF-based two-phase flow model together with an implicit time-stepping scheme, i.e., a dual-time formulation solution method with a preconditioned pseudo-time derivative. Initially, three time-step sizes, 5 s (small), 25 s, and 50 s (large), are evaluated to examine their impact on numerical saturation lines at various fabric porosities, 40%, 50%, and 60%, for a two-dimensional (2D) rectangular mould, and predictions are then compared with the well-known analytical Darcy. This is followed by a three-dimensional (3D) curved mould for a fillet L-shaped structure, wherein the degree-of-curvature of fibre preforms is incorporated using a User-Defined Function (UDF) to tailor the impregnation process. The developed approach shows its validation (1–5.7%) with theoretical calculations and experimental data for 2D and 3D cases, respectively. The results also stress that a shorter computational time can be achieved with a large time-step size while maintaining the same level of accuracy.

Numerical Simulation of Epoxy Resin Capillary Impregnation Process Based on VOF Method

Simulation and Experimental Investigation of Immersion Flow Field in Immersion Lithography

Numerical Simulation of Glass Bottle Forming Process

Numerical Simulation on Solvent Diffusion during Polymeric Coating Curing Processes

Numerical simulation of filling flow of polymer melt in injection molding

Finite Volume Method of the Microfiltration of Viscoelastic Polymer Solution

Modeling the Resin Flow and Numerical Simulation of the Filling Stage for Vacuum-Assisted Resin Infusion Process

Numerical Simulation of the Influence of Fibrous Structure on Resin Filling in RTM Process

Numerical simulation on velocities of two interacting fibers in fiber suspension

Numerical Analysis on Microscopic Flow Behavior of Resin with Resin Transfer Molding(rtm)process

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

Numerical Simulation of the Pouring Process in Deep-Water Flexible Pipe End Fittings

Simulation of impregnation kinetics of fabric fillers in the production of fiberglass articles

Numerical prediction of effect of filling flow on short fiber orientation in injection molding

Numerical Simulation of Two-Phase Flow in Liquid Composite Moulding Using VOF-Based Implicit Time-Stepping Scheme

Impregnation Velocity of Resin along the Thickness of Fiber Stacks under Vacuum Pressure

Numerical Simulation of Non-Newtonian Underfill in Flip-Chip Packaging

COMPARISON BETWEEN NUMERICAL SIMULATION AND EXPERIMENTAL RESULT OF RESIN FLOW IN RTM

Simulation Study and Optimization Strategies for Vacuum Infusion of GFRP Hoses Based on Resin Time-Viscosity Variables

Simulation method for filling stage in liquid composite molding based on a two-phase flow volume of fluid model

Multiphysics Coupling Study on Impregnation Process of Hot-Melt Resin in Fiber Fabrics for Composite Material Production