Abstract:The ventilation systems in nuclear power plants, hydropower plants, and other large-scale projects involve the transportation of fluids through large-scale pipelines. To achieve a more stable flow velocity distribution, the fluid needs to pass through a straight pipe section of sufficient length upon entering the pipe. Typically, this straight pipe section should be at least 15 times the inner diameter of the pipe. However, for large-diameter irregular square pipes with a diameter exceeding 1m, where the curved section is short and there are no long straight pipe sections before and after it, the flow field inside the pipe becomes complex, requiring accurate measurement of the flow rate.In this regard, a numerical simulation analysis is conducted to address this challenge. A mean velocity evaluation method based on the coefficient of variation is proposed. This method identifies multiple points within the pipe that best represent the average flow velocity, determining the insertion depth of sensors and the weight coefficients of these multiple measuring points. A calculation formula is derived, utilizing the cross-sectional average velocity as a function with the velocity values at multiple points in the flow field as independent variables. To validate the accuracy of the proposed method, flow measurement experiments are performed on a wind tunnel test bench. The calculated values obtained from the derived formula through numerical analysis are compared with the experimental results. The relative error within the full range is found to be less than 0.54%, confirming the accuracy of the formula. The research findings present a novel measurement method for airflow in large-diameter irregular square pipes and offer valuable practical insights for engineering applications.

Numerical Prediction and Experimental Measurement of Flow Noise in Pipes with Variable Cross-Sectional Area

Numerical Simulation of Serial Sudden Expansions Pipe Flow

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Flow Noise Prediction Of Branch Pipe With Double Elbows Filled With Steam Based On Cfd Numerical Simulation

Numerical Simulation Analysis and Experimental Verification of Air Flow Measurement in Large-Diameter S-shaped Pipe

LES-Based Numerical Simulation of Flow Noise for Submerged Body with Cavities

Large Eddy Simulation-Based Analysis of the Flow-Induced Noise Characteristics of Shell and Tube Heat Exchanger

Numerical simulation research on flow-induced noise of underwater vehicle head

Numerical Simulations and Experimental Validation on Passive Acoustic Emissions During Bubble Formation

Numerical Study for Turbulent Flow of Drag and Flow Noise with Wavy Wall

High-Precision Numerical Research on Flow and Structure Noise of Underwater Vehicle

Numerical Simulations of Noise Induced by Flow in Hvac Ventilation Ducts

Cavity Flow Noise Predictions

Investigation on the Flow Noise Propagation Mechanism in Simple Expansion Pipelines Based on Synergy Principle of Flow and Sound Fields

Flow-Induced Noise Characteristics Analysis of a Pipeline Structure in a Cabin Rigid Corner

A Three–dimensional CFD Approach for Prediction of Noise Reduction of Mufflers Without Mean Flow

Numerical study on air flow around an opening with large eddy simulation

Numerical prediction method of aerodynamic noise including boundary scattering generated by high subsonic cavity flow

Airfoil Trailing-Edge Noise Prediction Based on CFD/CAA Coupled Boundary Method

Numerical Simulation and Analysis of Flow Noise for Underwater High-Speed Vehicle

Numerical Simulation and Optimization of Flow Field in Elbow Pipes with Baffle