Abstract:Background: Bioactive compounds from various natural sources have been attracting more and more attention, owing to their broad diversity of functionalities and availabilities. However, many of the bioactive compounds often exist at an extremely low concentration in a mixture so that massive harvesting is needed to obtain sufficient amounts for their practical usage. Thus, effective fractionation or separation technologies are essential for the screening and production of the bioactive compound products. The applicatons of conventional processes such as extraction, distillation and lyophilisation, etc. may be tedious, have high energy consumption or cause denature or degradation of the bioactive compounds. Membrane separation processes operate at ambient temperature, without the need for heating and therefore with less energy consumption. The "cold" separation technology also prevents the possible degradation of the bioactive compounds. The separation process is mainly physical and both fractions (permeate and retentate) of the membrane processes may be recovered. Thus, using membrane separation technology is a promising approach to concentrate and separate bioactive compounds. Methods: A comprehensive survey of membrane operations used for the separation of bioactive compounds is conducted. The available and established membrane separation processes are introduced and reviewed. Results: The most frequently used membrane processes are the pressure driven ones, including microfiltration (MF), ultrafiltration (UF) and nanofiltration (NF). They are applied either individually as a single sieve or in combination as an integrated membrane array to meet the different requirements in the separation of bioactive compounds. Other new membrane processes with multiple functions have also been developed and employed for the separation or fractionation of bioactive compounds. The hybrid electrodialysis (ED)-UF membrane process, for example has been used to provide a solution for the separation of biomolecules with similar molecular weights but different surface electrical properties. In contrast, the affinity membrane technology is shown to have the advantages of increasing the separation efficiency at low operational pressures through selectively adsorbing bioactive compounds during the filtration process. Conclusion: Individual membranes or membrane arrays are effectively used to separate bioactive compounds or achieve multiple fractionation of them with different molecule weights or sizes. Pressure driven membrane processes are highly efficient and widely used. Membrane fouling, especially irreversible organic and biological fouling, is the inevitable problem. Multifunctional membranes and affinity membranes provide the possibility of effectively separating bioactive compounds that are similar in sizes but different in other physical and chemical properties. Surface modification methods are of great potential to increase membrane separation efficiency as well as reduce the problem of membrane fouling. Developing membranes and optimizing the operational parameters specifically for the applications of separation of various bioactive compounds should be taken as an important part of ongoing or future membrane research in this field.

Application of Membrane Technology in D-ribose Extraction

APPLICATION OF MEMBRANE SEPARATION TECHNOLOGY IN THE PREPARATION OF ULTRAPURE DIALYSATE

Two-step ultrafiltration of rhamnolipids using PSU-g-PEG membrane

Applications in Separation of Polysaccharides by Ultrafiltration

Application of biosurfactant rhamnolipid for cleaning of UF membranes

Separation of Biologically Active Compounds by Membrane Operations

A Rapid and Scalable Integrated Membrane Separation Process for Purification of Polysaccharides from Enteromorpha Prolifera

Application of Ultrafiltration Membrane System in Refined Cane Sugar Process

Forward Osmosis Concentration of High Viscous Polysaccharides of Dendrobium Officinale: Process Optimisation and Membrane Fouling Analysis

Application of ultrafiltration technique to the separation and purification of polysaccharides

Study on the Applications of Membrane Extraction

Blended Membrane of Polyethylene‐Glycol‐Grafted‐PIM‐1 and Tröger's Base Polymer for the Separation of Pentose and Hexose

Membrane biofouling control by D-ribose in membrane bioreactor

Depositing Lignin on Membrane Surfaces for Simultaneously Upgraded Reverse Osmosis Performances: an Upscalable Route

Application of Pressure - Driven Membrane Separation Technology in Reclamation of Wastewater

Study on the New Technology of Extracting Rhamnose

Study on Membrane Separation Technology in the Separation and Purification of Ophiopogonis Japonicus Polysaccharide

Purification and Reclamation of Pentose from Biomass Hydrolization Fermentation Broth

Fabrication of Anti‐fouling Thin‐film Composite Reverse Osmosis Membrane Via Constructing Heterogeneous Wettability Surface

Robust Loose Nanofiltration Membrane with Fast Solute Transfer for Dye/salt Separation

The application of ultrafiltration for separation of glycerol solution fermented by bacteria