Abstract:Background: Bioactive compounds from various natural sources have been attracting more and more attention, owing to their broad diversity of functionalities and availabilities. However, many of the bioactive compounds often exist at an extremely low concentration in a mixture so that massive harvesting is needed to obtain sufficient amounts for their practical usage. Thus, effective fractionation or separation technologies are essential for the screening and production of the bioactive compound products. The applicatons of conventional processes such as extraction, distillation and lyophilisation, etc. may be tedious, have high energy consumption or cause denature or degradation of the bioactive compounds. Membrane separation processes operate at ambient temperature, without the need for heating and therefore with less energy consumption. The "cold" separation technology also prevents the possible degradation of the bioactive compounds. The separation process is mainly physical and both fractions (permeate and retentate) of the membrane processes may be recovered. Thus, using membrane separation technology is a promising approach to concentrate and separate bioactive compounds. Methods: A comprehensive survey of membrane operations used for the separation of bioactive compounds is conducted. The available and established membrane separation processes are introduced and reviewed. Results: The most frequently used membrane processes are the pressure driven ones, including microfiltration (MF), ultrafiltration (UF) and nanofiltration (NF). They are applied either individually as a single sieve or in combination as an integrated membrane array to meet the different requirements in the separation of bioactive compounds. Other new membrane processes with multiple functions have also been developed and employed for the separation or fractionation of bioactive compounds. The hybrid electrodialysis (ED)-UF membrane process, for example has been used to provide a solution for the separation of biomolecules with similar molecular weights but different surface electrical properties. In contrast, the affinity membrane technology is shown to have the advantages of increasing the separation efficiency at low operational pressures through selectively adsorbing bioactive compounds during the filtration process. Conclusion: Individual membranes or membrane arrays are effectively used to separate bioactive compounds or achieve multiple fractionation of them with different molecule weights or sizes. Pressure driven membrane processes are highly efficient and widely used. Membrane fouling, especially irreversible organic and biological fouling, is the inevitable problem. Multifunctional membranes and affinity membranes provide the possibility of effectively separating bioactive compounds that are similar in sizes but different in other physical and chemical properties. Surface modification methods are of great potential to increase membrane separation efficiency as well as reduce the problem of membrane fouling. Developing membranes and optimizing the operational parameters specifically for the applications of separation of various bioactive compounds should be taken as an important part of ongoing or future membrane research in this field.

Feasibility of Separation of Hyaluronic Acid from Fermentation Broth by Membrane Technology

Separation of hyaluronic acid from fermentation broth by tangential flow microfiltration and ultrafiltration

Fractionalization of hayluronic acid fermentation broth by cross - flow microfiltration and ultrafiltration

Separation and Purification of Hyaluronic Acid from Fermentation Broth

Behavior of Hyaluronic Acid in Electro-Membrane Separation

APPLICATION OF MEMBRANE SEPARATION TECHNOLOGY IN THE PREPARATION OF ULTRAPURE DIALYSATE

Applications in Separation of Polysaccharides by Ultrafiltration

Organic Solvent Nanofiltration with Nanoparticles Aggregation Based on Electrostatic Interaction for Molecular Separation

Pretreatment of Propionic Acid Fermented Broth by Microporous Hollow-Fiber Membrane

Separation of Biologically Active Compounds by Membrane Operations

Selective Separation of Low Concentration CO2 Using Hydrogel Immobilized CA Enzyme Based Hollow Fiber Membrane Reactors

The Application of the Nanofiltration Membrane NF270 for Separation of Fermentation Broths

Downstream process intensification for biotechnologically generated hyaluronic acid: Purification and characterization

Conditions of Separating Butyric Acid from Fermentation Broth by Complexation Extraction

Separation and purification of hyaluronic acid by Fe3O4 nano and micro particles coated with chitosan and silica

Application of silicon rubber pervaporation membrane to butanol fermentation

Semiflexible Spiro-Branched Membrane with Adjustable Sub-Nanoscale Channels and High Positive Charge for Acid Recovery

Effects of organic phase, fermentation media, and operating conditions on lactic Acid extraction

Separation of Biobased Carboxylic Acids by Aqueous Phase Nanofiltration

Clarification of Succinic Acid Fermentation Broth by Ultrafiltration in Succinic Acid Bio–refinery

A simple method for the production of low molecular weight hyaluronan by in situ degradation in fermentation broth