Abstract:Pure and Ce-modified ZnO nanosheet-like polycrystalline samples were successfully synthesized by a simple and fast microwave-based process and tested as photocatalytic materials in environmental remediation processes. In an attempt to clarify the actual relationships between functionality and atomic scale structure, an in-depth characterization study of these materials using a battery of complementary techniques was performed. X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM), high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM), energy-dispersive X-Ray spectroscopy-scanning transmission electron microscopy (STEM-XEDS), photoluminescence spectroscopy (PL) and UV–Visible absorption spectroscopy were used to evaluate the effect of Ce ions on the structural, morphological, optical and photocatalytic properties of the prepared ZnO nanostructures. The XRD results showed that the obtained photocatalysts were composed of hexagonal, wurtzite type crystallites in the 34–44 nm size range. The SEM and TEM showed nanosheet-shaped crystallites, a significant fraction of them in contact with bundles of randomly oriented and much smaller nanoparticles of a mixed cerium–zinc phase with a composition close to Ce0.68Zn0.32Ox. Importantly, in clear contrast to the prevailing proposals regarding this type of materials, the STEM-XEDS characterization of the photocatalyst samples revealed that Ce did not incorporate into the ZnO crystal lattice as a dopant but that a heterojunction formed between the ZnO nanosheets and the Ce–Zn mixed oxide phase nanoparticles instead. These two relevant compositional features could in fact be established thanks to the particular morphology obtained by the use of the microwave-assisted hydrothermal synthesis. The optical study revealed that in the ZnO:Ce samples optical band gap was found to decrease to 3.17 eV in the samples with the highest Ce content. It was also found that the ZnO:Ce (2 at.%) sample exhibited the highest photocatalytic activity for the degradation of methylene blue (MB), when compared to both the pure ZnO and commercial TiO2-P25 under simulated sunlight irradiation. The kinetics of MB photodegradation in the presence of the different photocatalysts could be properly described using a Langmuir–Hinshelwood (LH) model, for which the ZnO:Ce (2 at.%) sample exhibited the highest value of effective kinetic constant.

UV-shielding Properties of Zinc Oxide-Doped Ceria Fine Powders Derived Via Soft Solution Chemical Routes

Visible-light-driven Boron/ferrum/cerium/titania Photocatalyst

Uv-Shielding and Photocatalytic Properties of Zno-Ceo2-Tio2 Composite

Solventless synthesis of cerium oxide nanoparticles and their application in UV protective clear coatings

Γ-Al2o3 Doped with Cerium to Enhance Electron Transfer in Catalytic Ozonation of Phenol

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Synthesis of cerium-doped zinc oxide nanomaterials by precursor method with improved photodegradation activity for Methylene blue and Red CL-5B dye

Synthesis and characterization of ceria nanoparticles by complex-precipitation route

Enhanced photocatalytic activity of Ce-doped ZnO nanopowders synthesized by combustion method

Preparation and Uv Shielding Properties of Zn/Ce/Ti Oxide and Composite Oxide by Combustion Method

General and facile synthesis of ceria-based solid solution nanocrystals and their catalytic properties

Preparation, Phase Transformation and Photocatalytic Activities of Cerium-Doped Mesoporous Titania Nanoparticles

Sonochemical synthesis of CeO2 nanoparticles with high photocatalytic and antibacterial activities under visible light

In-Depth Structural and Optical Analysis of Ce-modified ZnO Nanopowders with Enhanced Photocatalytic Activity Prepared by Microwave-Assisted Hydrothermal Method

Oleyl Phosphate-Modified Crystalline-Amorphous TiO2/Ce2O3 Heterojunction Nanoparticles with Significantly Reduced Photocatalytic Activity As Stable UV-Shielding Fillers

Sol-Gel auto-combustion, structural, photo-catalytic activity and UV-VIS study of Co1-xZnxFe2-yCeyO4 NPs (x = 0.3, y = 0.04)

Investigation on Mechanism of Photocatalytic Activity Enhancement of Nanometer Cerium-Doped Titania

Temperature-Sensitive Template for Preparation of ZnO/CeO2 Composite Photocatalytic Materials and Its Catalytic Performance

Thermal stability and photoluminescence of Zr1−xCexO2 (0≤x≤1) nanoparticles synthesized in a non-aqueous process

Tuning the UV absorbing ability of CeO2 nanoparticles with F− doping

The influence of H2O2 on the properties of CeO2-ZrO2 mixed oxides