Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

Micromechanical modeling of fatigue strength of unidirectional fibrous composites

A Micromechanics Model for Composites under Fatigue Loading

Fatigue Life Prediction of A Woven Fabric Composite Subjected to Biaxial Cyclic Loads

On micromechanics approach to stiffness and strength of unidirectional composites

Micromechanical Modeling of Longitudinal Tensile Behavior and Failure Mechanism of Unidirectional Carbon Fiber/aluminum Composites Involving Fiber Strength Dispersion

A New Approach to Fatigue Damage Modeling of Composite Laminates

Simulation of the mechanical properties of fibrous composites by the bridging micromechanics model

A Micromechanical Model for Longitudinal Compressive Failure in Unidirectional Fiber Reinforced Composite

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

A Fatigue Damage Meso-Model for Fiber-Reinforced Composites with Stress Ratio Effect

Micromechanical Modeling Tensile and Fatigue Behavior of Fiber-Reinforced Ceramic-Matrix Composites Considering Matrix Fragmentation and Closure

A continuum damage mechanics model for fatigue degradation and failure of short fiber reinforced composites

The Fatigue Damage Mesomodel for Fiber-Reinforced Polymer Composite Lamina

Micromechanical life prediction for composite laminates

Modeling of Damage Evolution and Failure in Fiber-Reinforced Ductile Composites under Thermomechanical Fatigue Loading

Characterization and modeling of fatigue behavior of chopped glass fiber reinforced sheet molding compound (SMC) composite

Micromechanical Progressive Damage Analysis of Inter- and Intra-Layer Failures in Fiber-Reinforced Composite Laminates

Compressive Failure Analysis of Unidirectional Carbon/epoxy Composite Based on Micro-Mechanical Models

Initial and Final Failure Strength Analysis of Composites Based on a Micromechanical Method

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

A Microscopic Dynamic Monte Carlo Simulation for Unidirectional Fiber Reinforced Metal Matrix Composites