Abstract:Toxicity, mobility, bioavailability and biofunctions of chromium, cadmium, mercury and lead are heavily dependent upon their specific chemical forms, leading to a high demand to metal speciation analysis rather than total quantification. Simultaneous speciation analysis of multiple metal(loid)s is attractive to a large sample capacity containing unstable analytes due to its economic and environmental advantages over the conventional single elemental strategies. In this work, an analytical method integrating online solid phase extraction into high performance liquid chromatography interfaced with inductively coupled plasma mass spectrometry (ICP-MS) to simultaneously preconcentrate and quantify Cr, Cd, Hg and Pb forms in pg L-1 levels in water was developed. Cr (III + VI), Cd(II), Hg(II), Pb(II), methylmercury (MeHg), ethylmercury (EtHg), and trimethyl (TML) and triethyl lead (TEL) were captured by the C18 adsorbent (equilibrated with 10 mL of 1.0 mM 2-hydroxyethanethiol at 10 mL min-1) and eluted by mobile phase (5.0 mM Cys at pH 2.0), then completely separated on the C18 column within 8.0 min and eventually determined by ICP-MS. Low limits of detection (0.001-0.007 ng L-1) and quantification (0.003-0.023 ng L-1), good relative standard deviations (<4%) and high enrichment factors (827-2656 folds) were obtained with good linearities. Three reference materials of total cadmium (GBW08602), total mercury (GBW08603) and total lead (GBW08601) in water were analyzed by the developed method to validate the accuracy with good agreement with certified values and satisfactory recoveries (92-100%). This method was proved feasible by the determination of Cr, Cd, Hg and Pb compounds in drinking water, river water, pond water and tap water.

Voltammetric determination of Pb2+ and Cd2+ with montmorillonite-bismuth-carbon electrodes

Synthesis of MnCo2O4 nanoparticles as modifiers for simultaneous determination of Pb(II) and Cd(II)

Simultaneous Determination of Cd(II) and Pb(II) Ions in Honey and Milk Samples Using a Single-Walled Carbon Nanohorns Modified Screen-Printed Electrochemical Sensor.

Bismuth-Coated Thick-Film Carbon Electrodes for the Detection of Lead and Cadmium by Anodic Stripping Voltammetry

Differential pulse anodic stripping voltammetric determination of Cd and Pb at a bismuth glassy carbon electrode modified with Nafion, poly(2,5-dimercapto-1,3,4-thiadiazole) and multiwalled carbon nanotubes

Voltammetric Determination of Pb 2+ in Water using Mn‐doped MoS 2 /MWCNTs/Nafion Electrode Coupled with an Electrochemical Flow Analysis Device

Simultaneous determination of cadmium (II) and lead (II) with clay nanoparticles and anthraquinone complexly modified glassy carbon electrode

Stripping voltammetric determination of cadmium and lead ions based on a bismuth oxide surface-decorated nanoporous bismuth electrode

A reduced graphene oxide supported Au-Bi bimetallic nanoparticles as an enhanced sensing platform for simultaneous voltammetric determination of Pb (II) and Cd (II)

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Direct Electrodeposition of Carbon Dots Modifying Bismuth Film Electrode for Sensitive Detection of Cd 2+ and Pb 2+

An Efficient Voltammetric Sensor Based on Graphene Oxide-Decorated Binary Transition Metal Oxides Bi2O3/MnO2 for Trace Determination of Lead Ions

On-site Determination of Pb2 + and Cd2 + in Seawater by Double Stripping Voltammetry with Bismuth-Modified Working Electrodes

CoFe2O4–CoFe microspheres for simultaneous electrochemical determination of trace lead(II) and cadmium(II) ions

An Efficient Electrochemical Sensor Based on Three-Dimensionally Interconnected Mesoporous Graphene Framework for Simultaneous Determination of Cd(Ii) and Pb(Ii)

Rapid detection of heavy metal ions based on a novel BMIMPF6-MWCNTs/GCE sensor and square wave voltammetry in actual water samples

Gastric tube-to-tracheal fistula closed with a latissimus dorsi myocutaneous flap.

High Sensitivity and Reproducibility of a Bismuth/Poly(bromocresol Purple) Film Modified Glassy Carbon Electrode for Determination of Trace Amount of Cadmium by Differential Pulse Anodic Stripping Voltammetry

Mesoporous carbon decorated with MIL-100(Fe) as an electrochemical platform for ultrasensitive determination of trace cadmium and lead ions in surface water

A Planar Disk Electrode Chip Based on MWCNT/CS/Pb2+ Ionophore IV Nanomaterial Membrane for Trace Level Pb2+ Detection

One-step Electrochemical Sensor Based on an Integrated Probe Toward Sub-Ppt Level Pb2+ Detection by Fast Scan Voltammetry.