Abstract:The effects of isothermal quenching temperatures and casting cooling rates on the microstructure and basic mechanical properties of FeSi75 alloy are investigated. The results show that the grains become smaller and more uniform at higher casting cooling rates, which effectively prevents the precipitation and enrichment of sulfides and phosphides and reduces PH3 release, hence leading to lower pulverization of FeSi. Easy pulverization of FeSi75 alloy during its crushing, storage, and transportation, inducing huge loss of such alloy annually, has been a critical problem. In this research, the pulverization mechanisms of FeSi75 alloy have been understood by introducing a range of characterization techniques to find out correlations between the alloy microstructure, mechanical properties, formation of PH3, and the pulverization during its solidification process. The experiments are carried out under different isothermal quenching temperatures and casting cooling rates. The results show that during the cooling process, the eutectic reaction occurs and produces the low‐ductility ζ phase, which leads to cracks in the microstructure and higher pulverization possibility. Moreover, sulfides and phosphides precipitate on the Fe‐Si microstructure and form clustered structures, and the release of PH3 increases with decreasing temperature. The internal stresses generate by phase transformations, the low‐ductility ζ phase, and the precipitation of sulfides and phosphides at crack sites collectively lead to the pulverization of FeSi75 alloy. It is also found that the grain size becomes smaller and more uniform at higher casting cooling rates, which effectively prevents the precipitation and enrichment of sulfides and phosphides, reduces PH3 release, and hence could prevent the pulverization of FeSi75 alloy.

Effect of Pulsing Current on Solidification Microstructure of Fe-Based Alloy

Effects of Processing Parameters of High-Density Pulsing Current on the Nanocrystallization of an Fe-Based Amorphous Alloy

INFLUENCES OF PULSING CURRENT ON CRYSTALLIZATION AND MICROHARDNESS OF Fe73.5Cu1Nb3Si13.5B9 AMORPHOUS RIBBON

Regulating the dissolution of brittle nano-precipitated phase in FeCrAl alloy by pulse current to repair aging properties

Effect of higher density pulsed current on solidification structures of 2024 Al alloy

Effect of Cr on solidification structure and microhardness of Al-Ni alloy

Influence of Pulse Current on Inclusion Properties of Alumina in Molten Steel

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

Influence of Pulsing Current on the Glass Transition and Crystallizing Kinetics of A Zr Base Bulk Amorphous Alloy

Improving the Solidification Structure of Commercially Pure Aluminium with Electropulse Acting on Liquid Metal

Effects of P on microstructures and tensile properties in Ni17Cr and Ni17Cr15Fe model alloys

A New Insight on the Pulverization Mechanisms of FeSi75 Alloy by Understanding Its Solidification Process

Crystallization behavior, soft magnetic properties and good bending ductility of high Fe content FeSiBCuPC alloys induced by composition design

Effect of Magnetic Pulsing and Low-Temperature Vacuum Annealing on the Soft Magnetic Properties of Hitperm Amorphous/Nanocrystalline Alloy

The Microstructure Evolution of a Fe-Ni-P-B Soft Magnetic Alloy Solidified at Different Undercooling

Effect of Electropulsing on Recrystallization of Fe-3%Si Alloy Strip

Effect of electric current pulse on microstructure and mechanical properties of AlCoCrFeNi 2.1 eutectic high entropy alloy

Electromagnetic levitation and solidification of ferrosilicon alloy and resulting microstructural evolution mechanisms

EFFECTS OF ELECTRIC CURRENT PULSE ON THE DYNAMICS OF DYNAMIC RECRYSTALLIZATION IN 2091 Al-Li ALLOY

Effect of P addition on soft magnetic properties of Fe–Si–B–P–Cu–C nano-crystalline alloys

Effects of milling process parameters and PCAs on the synthesis of Al0.8Co0.5Cr1.5CuFeNi high entropy alloy powder by mechanical alloying