Abstract:A nanostructure of lithium-zinc copper ferrite (LiZnCu-Ferrite) prepared experimentally by the auto-combustion method depends on different parameters. The auto-combustion method operates at a temperature (160 °C) suitable for preparing the required nanostructure ferrite phase. The dependent composition was [Li0.5-xZnxCuxFe2.5-xO4 at (x = 0, 0.05, 0.15, 0.25, 0.35, and 0.45)]. A pre-firing at temperature (650 °C) was applied during the calcination process that was suitable to remove unwanted products. The sintering at temperature (800 °C) was suitable for a pelletized shape of ferrite samples. The X-ray diffraction (XRD) pattern showed a spinel structure of ferrite phase produced for all samples under study with the lattice constant in the range (8.345–8.368 Å) as a function of (x). The crystallite size was in the range (18.41–30.27 nm) calculated by the Scherrer method. The transmission electron microscope (TEM) showed a production of nanorods in the size range (10–45 nm) and nanoparticles in the size range (10–40 nm). There was a coincidence between the results of the XRD and TEM analyses. On the other hand, the scanning electron microscope (SEM) showed the surface morphology and the nature of grain size, which was a sign of the presence of nanostructure; it agreed with the XRD analysis. FTIR spectra showed evidence that the system Li0.5-xZnxCuxFe2.5-xO4 had spinal ferrite nanoparticles successfully prepared by sol-gel auto-combustion. A vibrating sample magnetometer (VSM) showed a change in magnetic parameters as compensation factor (x) increased for all composites of LiZnCu-ferrite such as saturation magnetization (Ms), initial magnetic permeability (μi), remanence (Mr), and coercive force (Hc) that measured from M − H loops. A saturation magnetization increased as a function of (x) and recorded a maximum value at (x = 0.15). While the coercivity, initial magnetic permeability (μi), and remanence magnetization enhanced as a function of (x) and recorded a maximum value at (x = 0.45).

Salt Cosolvent-Combustion Rapidly Synthesized Small-Size Rod Zinc Oxide

Rapid Synthesis and Photocatalytic Performance of Milky and Rod-like Nanometer Zinc Oxide by Combustion Method

Combustion rapidly synthesized controllable yellow and light cerium oxides

Rod-Like Zinc Oxide Constructed by Nanoparticles: Synthesis, Characterization and Optical Properties

SYNTHESIS OF NANO-SIZED ZINC OXIDE BY PRECIPITATION METHOD AND COMBUSTION TECHNOLOGY

Rapid Synthesis of Mesoporous Ceria–zirconia Solid Solutions Via a Novel Salt-Assisted Combustion Process

Combustion synthesis of zinc ferrite powders

Solution Combustion Synthesis of ZnO Using Binary Fuel (Glycine + Citric Acid)

Combustion synthesis of zinc ferrite powders in oxygen

Synthesis Of Nicuzn Ferrite Nano-Sized Particles By Sol-Gel Auto-Combustion

High-Speed Shearing: an Ultra-Fast Internal Energy Accumulation Method for Nucleation of Snzno in Photocatalysis

Synthesis of ZnO Nano-crystal Powder by Molten Salt Method

Synthesis of nanometer Ni-Zn ferrite powders by sol-gel auto-combustion

Preparation of Nanosized Zinc Oxide by Vacuum Oxidation and Kinetic Study of Oxidation

In Situ Synthesis Of Nano-Sized Zrc And Its Formation Mechanism By Combustion Synthesis From Zr-C-Cu System

Salt-assisted combustion synthesis of highly dispersed perovskite NdCoO3 nanoparticles

Sol gel auto combustion method to prepare nanostructures LiZnCu ferrite

Study on soot-sodium interaction in the initial stage during pulverized coal combustion

Synthesis of ZnNb2O6 powder with rod-like particle morphologies

Liquid-Phase Synthesis of Nano-Zinc Oxide and Its Photocatalytic Property

A Facile and Novel Route to High Surface Area Ceria-Based Nanopowders by Salt-Assisted Solution Combustion Synthesis