Abstract:Science Progress, Volume 107, Issue 4, October-December 2024. Due to the advantages of high stiffness, high precision, high load capacity and large workspace, hybrid robots are applicable to drilling and milling of complicated components with large sizes, for instance car panels. However, the difficulty in establishing an exact dynamic model and external disturbances affect the high accuracy control directly, which will decrease the machining accuracy and thereby affect the machining quality and efficiency of the system. Sliding mode control is an effective approach for high-order nonlinear dynamic systems since that it is very insensitive to disturbances and parameter variations. However, chattering may exist in traditional sliding mode control with fixed parameters, which results from a constant approaching speed. Besides, the approaching speed will affect the chattering strength directly. To solve these problems, a modified sliding mode controller with self-adaptive parameters is proposed to enhance the trajectory-tracking performance of a 5-degree-of-freedom hybrid robot. Firstly, the kinematic model of the robot is established. Then adopting the principle of virtual work, a rigid dynamic model of the robot is built. Based on the built dynamic model, a modified sliding mode control method is developed, of which the approaching speed is dependent on the system state. Finally, the sliding mode controller with self-adaptive parameters is created for a hybrid robot. The proposed sliding mode controller can achieve a rapid approaching speed and suppress chattering simultaneously. Simulation results demonstrate that the proposed modified sliding mode controller can achieve a comparatively accurate and smooth trajectory, which owns good robustness to external disturbances.

Enhancement of Sliding Mode Controller by Unit Vector Continuous

Variable Structure Control with Sliding Mode Prediction for Discrete-Time Nonlinear Systems

A new discrete variable structure control algorithm based on sliding mode prediction

Continuous Sliding Mode Tracking Control with Robust Observer for Nonlinear Systems.

New Hierarchical Sliding Mode Control Method for Velocity Tracking of the Spherical Robot

Sliding-Mode Control With Switching-Gain Adaptation for Trajectory Tracking of Underactuated Unmanned Surface Vessels

A Fast Integral Sliding Mode Controller with an Extended State Observer for Position Control of Permanent Magnet Synchronous Motor Servo Systems

Global Sliding Mode Control Of Electro-Hydraulic 6-Dof Parallel Robots

A Robust And Fast Sliding Mode Controller For Position Tracking Control Of Permanent Magnetic Synchronous Motor

Time-Delay Sliding Mode Control for Trajectory Tracking of Robot Manipulators

Dynamic Modelling Using Screw Theory And Nonlinear Sliding Mode Control Of Serial Robot

Design and experimental evaluation of a novel sliding mode controller for an articulated vehicle

Smooth Robust Adaptive Sliding Mode Control of Manipulators With Guaranteed Transient Performance

Trajectory-tracking Sliding Mode Control for Two-Wheeled Mobile Robot

Sliding mode control with self-adaptive parameters of a 5-DOF hybrid robot

Trajectory-Tracking-Based Adaptive Neural Network Sliding Mode Controller for Robot Manipulators

Sliding Mode Control for a Novel 3-DOF Parallel Mechanism

Continuous Friction Feedforward Sliding Mode Controller for a TriMule Hybrid Robot

Design of a robust tracking controller for a nonholonomic mobile robot based on sliding mode with adaptive gain

A novel generalized sliding mode controller for uncertain robot manipulators based on motion constraints

Robust sliding mode prediction path tracking control for intelligent vehicle