Abstract:Science Progress, Volume 107, Issue 4, October-December 2024. Due to the advantages of high stiffness, high precision, high load capacity and large workspace, hybrid robots are applicable to drilling and milling of complicated components with large sizes, for instance car panels. However, the difficulty in establishing an exact dynamic model and external disturbances affect the high accuracy control directly, which will decrease the machining accuracy and thereby affect the machining quality and efficiency of the system. Sliding mode control is an effective approach for high-order nonlinear dynamic systems since that it is very insensitive to disturbances and parameter variations. However, chattering may exist in traditional sliding mode control with fixed parameters, which results from a constant approaching speed. Besides, the approaching speed will affect the chattering strength directly. To solve these problems, a modified sliding mode controller with self-adaptive parameters is proposed to enhance the trajectory-tracking performance of a 5-degree-of-freedom hybrid robot. Firstly, the kinematic model of the robot is established. Then adopting the principle of virtual work, a rigid dynamic model of the robot is built. Based on the built dynamic model, a modified sliding mode control method is developed, of which the approaching speed is dependent on the system state. Finally, the sliding mode controller with self-adaptive parameters is created for a hybrid robot. The proposed sliding mode controller can achieve a rapid approaching speed and suppress chattering simultaneously. Simulation results demonstrate that the proposed modified sliding mode controller can achieve a comparatively accurate and smooth trajectory, which owns good robustness to external disturbances.

New Hierarchical Sliding Mode Control Method for Velocity Tracking of the Spherical Robot

Direction and Trajectory Tracking Control for Nonholonomic Spherical Robot by Combining Sliding Mode Controller and Model Prediction Controller

New Riccati Velocity Controller of the Spherical Robot

Optimal Velocity Control of Spherical Robots Based on Offset-free Linear Model Predictive Control

Fuzzy PID Controller Based on Yaw Angle Prediction of a Spherical Robot*

Multi-Terrain Velocity Control of the Spherical Robot by Online Obtaining the Uncertainties in the Dynamics

Sliding-Mode Control With Switching-Gain Adaptation for Trajectory Tracking of Underactuated Unmanned Surface Vessels

Adaptive Model Prediction Control-Based Multi-Terrain Trajectory Tracking Framework for Mobile Spherical Robots

Robust Servo Linear Quadratic Regulator Controller Based on State Compensation and Velocity Feedforward of the Spherical Robot: Theory and Experimental Verification

Learning Accurate and Robust Velocity Tracking for Quadrupedal Robots

Cooperative Control System Based on Momentum Wheel and Pendulum for Spherical Robot

Adaptive and Robust Terrain Classification Control Algorithm for a Spherical Robot

An MPC-based Optimal Motion Control Framework for Pendulum-driven Spherical Robots

Time-Delay Sliding Mode Control for Trajectory Tracking of Robot Manipulators

Backstepping and Novel Sliding Mode Trajectory Tracking Controller for Wheeled Mobile Robots

Depth control of remotely operated vehicles using nonsingular fast terminal sliding mode control method

Sliding mode control with self-adaptive parameters of a 5-DOF hybrid robot

Mixed Fuzzy Sliding Mode Three-Dimensional Trajectory Tracking Control for a Wheeled Mobile Robot

An Adaptive Sliding Mode Motion Control Method of Remote Operated Vehicle

Trajectory-tracking Sliding Mode Control for Two-Wheeled Mobile Robot

Design and Motion Control of Spherical Robot With Built-In Four-Wheel Omnidirectional Mobile Platform