Abstract:Considering the inherent advantages of the Light Emitting Diode (LED) in the field of illumination, this work designs an intelligent supplementary lighting system using LED as the light source. Combining microcontroller and electronic circuit theory, the circuit is built with the microcontroller PIC16F873 as the core control chip. The system utilizes an external 220 V AC-20 V DC conversion power supply, hence operating on a 20 V DC power source. The system consists of four hardware parts: the onboard power supply uses TI-produced TPS54331 as the control chip to achieve voltage conversion; the external signals (flashing and burst flashing signals) are isolated from the microcontroller through an optocoupler circuit; the PWM pulses output from the microcontroller’s RC1/CCP2 pins drive the corresponding switching tubes to achieve the flashing function; the flashing synchronization signal is output externally after optocoupler isolation, and its synchronous output with the flashing signal is achieved through an optocoupler after LED conduction; the circuit is established using TI-produced differential bus transceiver SN65LBC184D to convert the external 485 differential signal to the level signal required by the microcontroller. In the experiment, after completing the hardware design, connecting the LED panel, and debugging the test program, it is found that the designed lighting system has a good supplementary lighting effect. According to the PWM output waveform, the flashing effect meets the design expectations. The Hadoop big data computing platform is introduced. Simulation testing reveals that under no backlight conditions, the system achieves an illumination intensity of around 20 klx at a distance of about 10 meters. With backlight conditions, the system maintains an illumination intensity of around 1.5 klx at a distance of about 10 meters. Further calculations are performed to analyze the variation in foot traffic within the test area’s illumination over 24 hours. The total illumination intensity during different time intervals is compiled, confirming that the system can autonomously adjust the illumination intensity of the area based on changes in foot traffic.

Development and establishment of LED display experiment device

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

The Method of Reflective Fly Eye Lens Design for LED Illuminating Projection System

Modular open integrative circuit experiments(1):Reviewing of the development and practice

Design of Light Emitting Diodes (LEDs) Lighting System and Its Application in Garden Landscape Decoration

Design of New LED Curtain Wall Controller and Its Effect in Architectural Decoration

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

Automatic Monitoring and Controlling LED Energy Saving Lighting System Based on C8051F020 MCU

Optical design for uniform color mixing illumination system

Intelligent Light Emitting Diode Flashing Supplementary Lighting Control Design and Its Big Data Illumination Analysis

LED Projection Light Brightness Uniformity Detection System Design

Coding and Driving Circuit of LED Display in Singlechip System

Application of LED Packaging Technology in the Opto-Electronic Engineering Practice Teaching

Design and Simulation of Dynamic Display LED Based on Single-chip Microcontroller

Practice and Discussion of Large Scale LED Tunnel Lamps Control

Research on Technology of Coding and Driving of LED in Singlechip System

Design of a new human-computer interactive device for projection display

Design and Realization of 3D-EEM System Based on Multi-wavelength LED Array as Exciting Light Source

Research Progress of Micro-LED Display Technology

Direct Dynamic LCD Backlight Based on LED

An Intelligent Controller of LED Street Light Based on Discrete Devices