Abstract:Human society’s need to build low-weight, high-strength and durable structures has increased the demand for composite materials. In this case, composites are used where high mechanical strength, low weight, sound and thermal insulation properties are required. One of the most important issues now is designing materials and coatings aimed at reducing heat loss and resisting high temperatures. One way to address this problem is to develop a technique for preparing and applying composite materials that slow down their heating applied to a surface. In this study, carbon nanotubes (CNTs) reinforced composites were fabricated using silicone molding to be applied to honeycomb sandwich structures. To determine the effect of CNTs on the thermal behavior of the sandwich panels, different weight percentages of this material (0.025, 0.05. 0.075 wt.%) were added to the epoxy resin. The results showed that the thermal stability of the epoxy composites was directly related to the increase in the percentage of CNTs as the CNT content increased to 0.075 wt.%, and the thermal degradation temperature of the epoxy composites increased by 14 °C. In addition, the energy absorption increased by 4.6% with an increase in CNTs up to 0.075 wt.%. Density measurements showed that the density of the nanocomposite samples increased by adding CNTs to pure epoxy resin. The actual densities of the samples reinforced with 0.025, 0.05, and 0.075 wt.% CNTs are 0.925, 0.926, and 0.927 of the theoretical density, respectively. Since the CNT dispersion uniformity in the epoxy matrix can significantly affect the properties of the composites, in this study, a new method of dispersing CNTs in the epoxy resin matrix resulted in higher thermal conductivity while using lower amounts of CNTs compared to other studies. The storage modulus of the epoxy matrix composites reinforced with 0.05 wt.% in this study was 25.9% and 6.9% higher than that from the previous study reinforced with 0.1 wt.% and 0.25 wt.% CNTs, respectively. Furthermore, the tanδ and loss modulus of the composite reinforced with 0.05 wt.% CNTs in this study were 52% and 54.5% higher than that from the previous study with 0.1 wt.% CNTs, respectively. This study provided an optimal approach for designers and engineers who want to effectively design their composite honeycomb sandwich structure with better thermal properties.

Effect of Carbon Nanotubes on Thermal Conductivity and Mechanical Performance of Carbon Foam Derived from Mesophase Pitch

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Effect of Multi-walled Carbon Nanotubes on Mechanical, Thermal and Electrical Properties of Phenolic foam via In-situ Polymerization

Preparation and Performance of Mesophase Pitch Based Carbon Foam

Electrical conductivity and electromagnetic interference shielding of epoxy nanocomposite foams containing functionalized multi-wall carbon nanotubes

The effect of the molecular structure of naphthalene-based mesophase pitch on the properties of carbon fibers derived from it

Comprehensive performances of carbon nanotube reinforced foam concrete with tetraethyl orthosilicate impregnation

Synergistic effect of nanodiamond and titanium oxide nanoparticles on the mechanical, thermal and electrical properties of pitch‐derived carbon foam composites

In-Situ Doping B4C Nanoparticles in Mesophase Pitch for Preparing Carbon Fibers with High Thermal Conductivity by Boron Catalytic Graphitization

Preparation and Performance of Mesophase Pitch Based Graphite Foam

The Effect of B4C on the Properties of Graphite Foam Prepared by Template Method

Effects of Mesophase Pitch Raw Material on the Properties and Crystal Structure of Graphite Foams

Effect of the structure and properties for carbon graphite materials with oleic acid modified multi-walled carbon nanotubes

Fabrication and mechanical properties of in situ prepared mesocarbon microbead/carbon nanotube composites

Fabrication and characterization of closed-cell aluminum foams with different contents of multi-walled carbon nanotubes

Effects of Carbon Nanotubes on Thermal Behavior of Epoxy Resin Composites

Molecular structure effects of mesophase pitch and isotropic pitch on morphology and properties of carbon nanofibers by electrospinning

Preparation of Reinforced Carbon Foams with Different Fillers

Microstructure, electrical conductivity and mechanical properties of graphitization carbon foam derived from epoxy resin modified with coal tar pitch

Research on the thermal conductivity and mechanical properties of carbon fiber reinforced thermoplastic composites doped with different sizes carbon nanotubes: A combination of experiments, numerical simulations and multi‐objective optimization

Effect of chemically grafted CNTs onto carbon fiber on the mechanical properties of fiber metal laminates