Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

A numerical study on the temperature distribution of unsteady frost layer for finned-tube vaporizer

An Experimental Study on the Air Side Heat Transfer Performance of the Perforated Fin-Tube Heat Exchangers under the Frosting Conditions

Analysis on unsteady frosting rate for air-heated finned-tube vaporizer

Experiment on Frost Characteristic of Air-warmed Cryogenic Finned-tube Vaporizer

Numerical Simulation on Frost of Cryogenic Finned-Tube Vaporizer Based on Fractal Theory

Thermal conductivity of frost layer on finned-tube vaporizer based on fractal theory

Frost model and numerical simulation of air-heating fin-tube vaporizer

Numerical study on natural convection heat transfer of fin-tube air-heating vaporizer

Numerical simulation analysis of a heat transfer tube in SuperORV

Experimental study on heat transfer characteristics of flowing air on the surface of finned-tube vaporizer under frosting conditions

Numerical Simulation of Frosting on Wavy Fin-and-tube Heat Exchanger Surfaces

Numerical Simulation of Frost Layer Growth on a Horizontal Plate

An Experimental study of low-temperature finned-tube heat exchanger in frosting conditions

Experimental study on heat transfer characteristics of air-heating cryogenic finned-tube vaporizer under frosting conditions

A modeling study of spatial and temporal frost growth on the edge of windward fins for a tube-finned heat exchanger

Numerical simulation on the frosting and heat transfer characteristics of plate-fin heat exchanger considering confinement effect

Temporal and spatial frost growth prediction of a tube-finned heat exchanger considering frost distribution characteristics

Heat transfer analysis of frosting under cryogenic condition

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Numerical simulation of phase change heat transfer and flow for fin-tube vaporizer