Abstract:The commercial application of lithium–oxygen (Li–O2) batteries has been seriously hindered by their large overpotential and inferior cycling performance caused by the insoluble and insulated traits of the discharge product, Li2O2. Herein, hierarchical hollow NiCo-LDH/MnO2 hybrid nanostructures derived from metal–organic frameworks (MOFs) are successfully constructed as cathodes for Li–O2 batteries to fundamentally improve the decomposition kinetics of Li2O2. The hollow NiCo-LDH/MnO2 nanostructures assembled by hollow NiCo-LDH and MnO2 nanosheets possess a highly special surface area, abundant open active sites, and a fast diffusion path for Li+ and oxygen species. As expected, accelerated sluggish oxygen reduction reaction/oxygen evolution reaction kinetics and reduced charge/discharge overpotentials can be obtained. The toroidal Li2O2 assembled by nanoflakes formed on the surface of the cathode can be conducive to form a low-impedance Li2O2/cathode contact interface to achieve the reversible formation and decomposition of Li2O2. The Li–O2 battery based on the NiCo-LDH/MnO2 cathode shows a high charge/discharge specific capacity of 13,380 mA h g–1 at 100 mA g–1 and a continuous cycling stability for 162 cycles at a fixed capacity of 500 mAh g–1 as well as a low overpotential of 0.63 V. Moreover, the application of MOF-derived porous hierarchical nanostructures expands the selection range of electrocatalysts and offers a new idea of structure design for Li–O2 batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01626?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01626</a>.Experimental details, SEM images, TEM images, N2 adsorption/desorption isotherms, EDS image, survey spectrum and electrochemical analysis (discharge/charge curves, Nyquist plots, rate performance, and cycling stability performance), contents of MnO2 in the NiCo 2-X sample calculated from XPS, comparison of the performance of the NiCo 2-X nanocomposite electrodes, and SEM images and XPS spectra of electrodes after discharge and charge (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01626/suppl_file/ae0c01626_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

MnOx as Electrocatalyst for Lithium Oxygen Batteries

MnO2-x Nanosheets on Stainless Steel Felt As a Carbon- and Binder-Free Cathode for Non-Aqueous Lithium-Oxygen Batteries

High Performance Li–O2 Battery Using Γ-Mnooh Nanorods As a Catalyst in an Ionic-Liquid Based Electrolyte

Effect of Manganese Oxides on the Performance of Lithium-Air Battery

MOF-Derived Mn2 O3 Nanocage with Oxygen Vacancies as Efficient Cathode Catalysts for Li-O2 Batteries

Defect-induced deposition of manganese oxides on hierarchical carbon nanocages for high-performance lithium-oxygen batteries

Synthesis, Characterization, and Structural Modeling of High‐Capacity, Dual Functioning MnO2 Electrode/Electrocatalysts for Li‐O2 Cells

Mesoporous Mn2O3 Rods As a Highly Efficient Catalyst for Li-O-2 Battery

Synthesis of Hierarchical Porous Δ-Mno2 Nanoboxes As an Efficient Catalyst for Rechargeable Li-O2 Batteries.

In situ fabrication of porous-carbon-supported α-MnO2 nanorods at room temperature: application for rechargeable Li–O2 batteries

A Novel Cr2O3/MnO2-x Electrode for Lithium-Oxygen Batteries with Low Charge Voltage and High Energy Efficiency

Synthesis and Performance of Nano MnO As an Anode Material for Lithium-Ion Batteries

High Performance Li-O2 Batteries Enabled with Manganese Sulfide As Cathode Catalyst

Highly-efficient MnO2/carbon Array-Type Catalytic Cathode Enabling Confined Li2O2 Growth for Long-Life Li–O2 Batteries

Metal–Organic Framework-Derived Porous NiCo-Layered Double Hydroxide@MnO 2 Hierarchical Nanostructures as Catalytic Cathodes for Long-Life Li–O 2 Batteries

Understanding the Dual-phase Synergy Mechanism in Mn2O3-Mn3O4 Catalyst for Efficient Li-CO2 Batteries.

Silver decorated alpha-manganese oxide nanostructured electrocatalyst for rechargeable lithium–oxygen battery

Au-nanocrystals-decorated Δ-Mno2 As an Efficient Catalytic Cathode for High-Performance Li-O2 Batteries.

Porous Mn2O3 Cathode for Highly Durable Li-CO2 Batteries

Two-Dimensional Mn3O4 Nanosheets with Dominant (101) Crystal Planes on Graphene As Efficient Oxygen Catalysts for Ultrahigh Capacity and Long-Life Li–O2 Batteries

The Effect of Different Carbon Materials on Manganese Oxide-Based Lithium-Air Batteries in Ambient Environment